大粒種子精播機的設計【玉米、大豆快速精密雙行播種機優秀課程畢業設計含9張CAD圖紙帶開題報告+外文翻譯】-jxsj86
大粒種子精播機的設計【玉米、大豆快速精密雙行播種機】
摘 要
本課題針對北方一年一熟旱作農業區缺乏配套播種機具的問題，在前人研究的基礎上，從原理與結構上開發設計一種快速精密播種機,考慮實際生產作業需要,在滿足精密播種要求的前提下降低成本，提高精密播種機作業速度。精密播種是將精確數量的合格種子播種到符合生長要求的土壤中預定部位，包括精密的株距、播深和行距組成的三維空間坐標。本播種機主要采用型孔式的排種器，配合輸肥管、導種管、開溝器、覆土器和鎮壓器等組成，一次完成開溝、側深施肥、精密播種、覆土鎮壓等項作業。本文將播種機設計成2行播種作業以實現快速播種要求，采用雙圓盤開溝器，其開溝整齊,工作穩定，能適應較高的作業速度。本快速精密播種機具有結構緊湊、傳動方式簡單和工作性能可靠等特點，它可以播種不同類型的的種子（如玉米、大豆），并可與施肥裝置組合設計成播種施肥機組，具有廣泛應用前景。
本文介紹的快速精密播種機工作原理如下：機器前進的同時，施肥圓盤轉動開溝，地輪轉動并通過鏈輪、鏈條驅動排肥軸轉動，排肥盒排下的肥料通過排肥管施到土壤中，雙圓盤開溝器轉動并通過兩側限深輪仿行限深開溝，壓溝刀擴溝，同時由排種器排出的種子從導種管進入種溝內，后面的V形鎮壓輪將溝側土壤壓入種溝，鎮壓同時并覆土，從而完成精密播種要求。
關鍵詞：播種機；排種器；開溝器；鎮壓輪；限深輪
ABSTRACT
According to the problem of lacking suitable planter in one crop a year arid agriculture region of North China, upon the basis of predecessors’ research, this paper designed a kind of fast and precise seed sowing machine from the structure and principles. According to the needs of the actual production, on the premise of meeting the reqirement of precise seed sowing, the cost should be cut down and the speed increased. The precision planting provides accurate amount of seeds to soil at equal interval within rows and seeding depth. This planter is mainly comprised of the aperture-mould metering-device, fertilizer-carried pipe, seeds-carried pipe, double disics opener, covering and suppressing device; it is a complicated process comprising of ditching, fertilizing, planting, covering and suppressing; the requirements of its field performance are quite strict; it is designed to be 2 rows planter to improve its work speed and double discs opener is adopted, which ditches oderly, runs stably, and can be suitable for high speed. It has the characreristics of compact structure, simple transmission and riable performance, can sow different kind of seeds, such as maize, soybeans. Combined with fertilizing device, the planter can be designed to sow seeds and fertilizer at the same time. The planter has a widespread prospect of application.
This article introduced the system of the fast and precise seed sowing machine. Its principle is the following: as the plater runs, the fertilizing disc turns to ditch, and the soil-wheel runs and drives fertilizer-drain shaft rotates via chains transmission; the fertilizer discharged by the box is fertilized into the soil; double disics opener turns and ditches with certain depth through depth-limited wheel; ditches-pressing blades enlarge the ditches; the seeds discharged by metering-device arrive at the ditches through seeds-carried pipe; and the suppressing V-wheel behind suppress the soil into the ditches with seeds and cover it with the soil at the same time. Thus, the requirement of precision planting has been completed.
Key words：Seed; Aperture-mould Metering-device; Double Disics Opener; Suppressing V-wheel; Depth-limited Wheel
目錄
摘 要 1
ABSTRACT 2
第1章 第1章 緒 論 5
1.1概述 5
1.1.1 國內播種機發展現狀 5
1.1.2國外播種機發展現狀 7
1.1.3種作業發展趨勢 8
1.2播種方法 9
1.3快速精密播種機的研究意義 10
第2章 播種機總體方案確定 11
2.1 播種機的設計依據與技術分析 11
2.1.1 可行性分析 11
2.1.2 農藝技術指標 12
2.1.3 配套技術指標 12
2.1.4 技術經濟指標 12
2.2 總體設計 13
2.2.1 工作原理及結構形式 13
2.2.2 總體參數設計 13
2.2.3 播種機的總體設計方案 14
2.3 本章小結 15
第3章 零部件設計計算及安裝 15
3.1傳動系統設計 15
3.2種肥箱設計 20
3.3排肥器設計 21
3.4排種器設計 22
3.5排種軸設計 25
3.6塔輪鏈傳動設計 29
3.7其他工作部件的確定 31
3.7.1施肥圓盤裝配 31
3.7.2開溝部件 31
3.7.3仿形機構 33
3.7.4鎮壓裝置 34
3.7.5支承輪裝配 34
3.7.6機架總成 35
3.7.7播種單體裝配 35
3.8部件的安裝 36
3.9播種前的準備 37
3.10本章小結 40
第4章 播種機的使用維護和保養 41
4.1播種機的使用 41
4.1.1農藝技術要求 41
4.1.2播種的農業技術要求 41
4.2播種機的維護和保養 42
4.2.1注意事項 42
4.2.2維護和保養 43
4.3本章小結 44
結 論 45
參考文獻 46
致 謝 47
【詳情如下】【需要咨詢購買全套設計請加QQ1459919609】
型孔式排種器A2.dwg
大粒種子精播機的設計.doc
大粒種子精播機的設計任務書.doc
大粒種子精播機的設計開題報告.doc
大粒種子精播機的設計題目審定表.doc
導種輪A3.dwg
開溝器A2.dwg
快速精密播種機裝配圖A0.dwg
排種軸A3.dwg
摘要.doc
播種單體機架焊合A1.dwg
文件清單.txt
