轉向器零件鉆3-直徑φ7mm孔夾具設計（轉換套夾具）（全套設計含CAD圖紙）

轉向器零件鉆3-直徑7mm孔夾具設計（轉換套夾具）（全套設計含CAD圖紙）,轉向器,零件,直徑,mm,妹妹,夾具,設計,轉換,全套,cad,圖紙 常州機電職業技術學院畢業設計（論文）說明書作 者： 學 號： 系 部： 專 業： 題 目：Cw5-120壓裝機換向器組件工藝與夾具設計 指導者：評閱者： 年 月 畢業設計（論文）中文摘要零件的加工工藝編制，在機械加工中占有非常重要的地位，零件工藝編制得合不合理，這直接關系到零件最終能否達到質量要求；夾具的設計也是不可缺少的一部分，它關系到能否提高其加工效率的問題。因此這兩者在機械加工行業中是至關重要的環節。在機床上對零件進行機械加工時，為保證工件加工精度，首先要保證工件在機床上占有正確的位置，然后通過夾緊機構使工件在正確位置上固定不動，這一任務就是由機床夾具完成。對于單件、小批量生產，應盡量使用通用夾具，這樣可以降低工件的生產成本。但是由于通用夾具適用各種工件的裝夾，所以夾緊時往往比較費時間，并且操作復雜，生產效率低，也難以保證加工精度，為此需設計專用夾具。本次設計內容涉及了機械制造工藝及機床夾具設計、金屬切削機床、公差配合與測量等多方面的知識。關鍵詞：工藝，工序，切削用量，夾緊，定位，誤差畢業設計（論文）外文摘要Title： Cw5-120 press commutator assembly process and fixture designAbstract：Part of the preparation processing, in processing machinery occupies very important position, part process system is reasonable, which is directly related to the final part quality requirements can be met; fixture design is an indispensable part of, it is related to can improve the efficiency of the problem. Therefore both in the mechanical processing industry is a vital link.In machine tool of mechanical parts of the process, in order to ensure the processing precision of the workpiece, first of all to guarantee the workpiece holds the correct position on the machine, then by clamping the workpiece in the correct position is fixed, this task is by the machine tool fixture. For single and small batch production, the use of universal fixture should be as far as possible, so that the production cost of the workpiece can be reduced. But because the universal fixture is suitable for various workpiece clamping, so clamping tend to spend more time and the operation is complex, the production efficiency is low, it is difficult to guarantee machining accuracy, so it is necessary to design a special fixture.The design content involves the mechanical manufacturing process and machine tool fixture design, metal cutting machine tools, tolerance and measurement and other aspects of knowledge.Keywords ： process, process, cutting dosage, clamping, positioning目錄1 序 言12 零件的分析22.1零件的形狀22.2零件的工藝分析23 工藝規程設計43.1 確定毛坯的制造形式43.2 基面的選擇43.3 制定工藝路線43.3.1 工藝路線方案一53.3.2 工藝路線方案二53.3.3 工藝方案的比較與分析63.4 選擇加工設備和工藝裝備73.4.1 機床選用73.4.2 選擇刀具73.4.3 選擇量具73.5 機械加工余量、工序尺寸及毛坯尺寸的確定73.6確定切削用量及基本工時94 夾具設計204.1 研究原始質料204.2 定位、夾緊方案的選擇214.3切削力及夾緊力的計算214.4 誤差分析與計算224.5鉆套、襯套、鉆模板設計與選用234.6 確定夾具體結構尺寸和總體結構264.7 夾具設計及操作的簡要說明27總 結27致 謝28參 考 文 獻306