薯類去皮機的結構設計【輕型立式薯類去皮機結構設計】

薯類去皮機的結構設計【輕型立式薯類去皮機結構設計】,輕型立式薯類去皮機結構設計,薯類去皮機的結構設計【輕型立式薯類去皮機結構設計】,薯類,去皮,結構設計,輕型,立式 附表三江西農業大學畢業論文（設計）任務書論文（設計）課題名稱薯類去皮機的結構設計學生姓名院（系）工學專業班級學生聯系方式Email 電話指導教師職稱教授學歷博士畢業論文（設計）要求：1、好學上進，能吃苦耐勞，刻苦鉆研，有相應專業知識具備獨立工作能力；2、能敏感及時地查閱到國內外與本課題相關的資料和文件；3、會計算機繪圖，能通過計算機繪圖繪制相應的零件、部件和組件，繪制出總裝配圖；4、總圖紙量不少于1.5張零號圖；5、工作量要符合我院畢業設計的要求；6、根據畢業設計的要求在規定的時間內完成畢業答辯所需要的全部工作。畢業論文（設計）內容與技術參數：第一階段：現場了解情況；查閱國內外有關資料和文件分析紅薯深加工種類與加工方法，定性找到相關裝置；第二階段：研究清洗機機構的原理，給出紅薯清洗機設備動力與傳動系統及其零部件的設計思想；第三階段：給出總體方案，畫出工作草圖，通過計算機繪圖繪制相應的零件和部件，繪制出總裝配圖；第四階段：撰寫出設計說明書；根據畢業設計的要求在規定時間內完成畢業答辯所需要的所有工作。畢業論文（設計）工作計劃：第一階段：現場了解情況；查閱國內外有關資料和文件分析單元組合式傳動輸送機方法，定性找到相關裝置；第二階段：研究單元組合式傳動輸送機機構的原理，給出單元組合式傳動輸送機力與傳動系統及其零部件的設計思想；第三階段：給出總體方案，畫出工作草圖，通過計算機繪圖繪制相應的零件和部件，繪制出總裝配圖；第四階段：撰寫出設計說明書；根據畢業設計的要求在規定時間內完成畢業答辯所需要的所有工作。接受任務日期： 2008 年 12 月 25 日要求完成日期： 2009 年 5月 12 日 學 生 簽 名： 指導教師簽名： 院長（主任）簽名： 2畢業論文題目學校代碼：10410 學 號：20050426本 科 畢 業 設 計題目： 輕型立式薯類去皮機結構設計 學 院： 工 學 院 姓 名： 金 道 煌 學 號： 20050426 專 業： 機械設計制造及自動化 年 級： 2005級 指導教師： 張 廬 陵 二OO九年 五 月- 16 -輕型立式薯類去皮機結構設計摘 要馬鈴薯為植物的塊莖，形狀為圓形或橢圓形，其結構由表皮層、形成層、外果肉和內果肉四部分。馬鈴薯品種可分兩大類，一類是淀粉含量較高的，適宜于作為生產淀粉的原料，另一類是蛋白質含量較高，適宜作為蔬果或制成多種食品1。馬鈴薯營養豐富，除直接食用外，還可以加工成食品、全粉、淀粉等經濟價值較高的食品，通過加工可以大幅度提高鮮薯的商品價值2。鑒于馬鈴薯的很多特點，馬鈴薯得到了廣泛的利用。a.馬鈴薯可鮮食，鮮食用馬鈴薯主要用作家庭餐館烹調，我國主要用來制作菜肴、面點小吃等大眾食品。果外除蒸烤鮮馬鈴薯作主食外，還有咖哩飯、燉薯快以及色拉涼拌菜。馬鈴薯可制成方便食品、快餐食品、休閑食品，如馬鈴薯粉、馬鈴薯全粉、脫水馬鈴薯片（條）、速凍薯?xiàng)l（薯泥）、蒸薯?xiàng)l、罐裝和去皮馬鈴薯、馬鈴薯脆片、馬鈴薯膨化小食品等；b，加工成淀粉及相關產品：由于馬鈴薯淀粉的優良特性，不僅是制作高級方便面、面類最為理想的添加淀粉，而且還是肉制品、魚糜制品等的添加劑或原料。馬鈴薯淀粉也是粉條的優質原料。出馬鈴薯淀粉外，也可得到相關產品，包括各種變性淀粉、飴糖、葡萄糖、膳食纖維制品等。C,其他制品：馬鈴薯提取淀粉后的殘?jiān)芍瞥神R鈴薯發酵飼料、提取蛋白等5。去皮（peeling）用于多種水果和蔬菜的加工中以除去不需要或不可食的物質，并改善成品的外觀。主要的考慮因素包括通過盡可能減少去掉的部分以及可能降低能源、勞力和物質成本來降低總成本。這里，介紹摩擦去皮方法：食品被放置在金剛砂滾軸上或內壁排列著金剛砂的轉筒中，在磨損力的表面除去食品的表皮后又被大量的水沖洗干凈。該方法的優點是由于過程是在溫室下進行而具有的能源成本低以及資本成本低、無熱損傷，食品外觀良好的優點，不規則食品表面（如馬鈴薯上的“孔眼”）會破壞去皮產品的外觀，需要手工去除3。關鍵詞：馬鈴薯、去皮清洗、農產品、食品機械 Abstract Potato tuber for plants for circular or elliptic shape, structure, by cuticular layer and layer, the pulp and pulp within four parts. Potato varieties can be divided into two kinds, one kind is starch content high, suitable for the production of raw materials as starch content of protein, another kind is higher, suitable for various fruits or food.Potato nutrition is rich, besides direct edible, but also can be processed into food, powder, starch, etc, the economic value of higher food processing can be greatly improved through the value of fresh chips.In view of many of the characteristics of the potato, potato has been widely used. a. can be fresh potatoes, fresh potatoes used mainly for cooking the family restaurant, China is mainly used to create dishes such as pasta snack food of the public.In addition to fresh fruit outside the potato for food, there are curry rice, stew and potato salad cold fast food. Potatoes can be made from convenience foods, fast foods, snack foods, such as potato flour, potato powder, dehydrated potato chips (article), frozen French fries (potato mud), steamed potato chips, canned and peeled potatoes, potato crisps , extruded snacks such as potato; b, processed into starch and related products: potato starch as a result of the excellent features, not only is the production of high-level instant noodles, flour add the most ideal type of starch, but also meat, surimi products such as additives or raw materials . Potato starch is also of high quality raw materials. The potato starch, but also related products available, including a variety of modified starch, maltose, glucose, dietary fiber products. C, other products: potato residue after starch extraction can be made from potato fermented feed, extract proteinSkin peeling (for) of fruits and vegetables processing to remove need not eat or not, and improve the physical appearance of the product. The main factors including through minimize removed part and may reduce the labor and material costs energy, reduce the total cost. Here introduces friction peel method: food is placed on the walls or emery roller drum lined up in the emery, wear away the food of skin surface by the amount of water after washing clean. The advantage of this method is due process is conducted in greenhouse with low cost and the energy of capital cost is low, no heat, the advantages of good food appearance, irregular food surfaces (such as potato holes) destroys peel product appearance, need manual removal. Key words: Potatoes、Peel cleaning、Agricultural、Food machinery目錄前言- 1 -1.馬鈴薯去皮機工作原理- 2 -1.1去皮清理的原理- 2 -1.2去皮設備- 2 -2軸的設計- 4 -21軸的材料- 4 -22軸的強度計算- 4 -23軸的結構尺寸初步確定- 5 -3.滾動軸承的設計- 6 -3.1.滾動軸承類型的選擇- 6 -3.2.滾動軸承部件的組合設計.- 7 -4.電動機的選擇.- 7 -5.齒輪的結構設計- 8 -5.1.齒輪材料及熱處理- 9 -5.2.齒輪相關參數的初步確定- 9 -5.3.校核齒輪強度- 10 -6.圓筒的結構設計- 12 -7.軸承座的結構設計- 12 -8.圓盤的結構設計- 13 -參 考 文 獻- 15 -致謝- 16 - 前言綜觀食品加工業對加工技術的要求，食品加工技術的發展趨勢大致如下：第一，提高原料的利用率。由于食品生產企業利潤較低，提高原料的利用率是企業降低生產成本的重要途徑。第二，提高工作效率，便于實現大規模生產。第三，營養性和穩定性高，現在人們對食品的要求越來越高，大家都很關注食品的營養功效4。中國的薯類產量占世界總產量的28%，居世界第一位。近年來薯類的生產和加工發展十分迅速，尤其是美國、英國、德國和日本等國以發展優質專用化的薯類品種，先進適用的技術裝備，高質量的加工制品和規?；a(chǎn)經營方式等，推動著當今世界薯類加工業的發展。中國在薯類的種植和深加工上也加大了開發力度，形成了產前、產后良性循環的發展優勢。尤其是加工后的薯類食品更是受到許多消費者的青睞，且在食品工業中所占的比例也越來越大2。馬鈴薯屬塊莖類作物，馬鈴薯塊莖中富含淀粉、維生素和糖，其塊莖中的主要物質如下：（1）淀粉和糖分，馬鈴薯淀粉由直鏈淀粉與支鏈淀粉組成，糖分占馬鈴薯塊莖總質量的1.5%左右，主要為葡萄糖、果糖、蔗糖。（2）含氮物，馬鈴薯塊莖中的含氮物包括蛋白質和非蛋白質兩部分，以蛋白質為主，富含球蛋白，這是全價蛋白質，幾乎含有所有的必需氨基酸，在營養上具有重要意義。（3）脂肪，在馬鈴薯塊莖中，脂肪含量為0.04%-0.94%。（4）有機酸 （5）維生素，馬鈴薯中含有多種維生素。（6）酶類，馬鈴薯中含有淀粉酶、蛋白酶、氧化酶等2。馬鈴薯深加工可制成馬鈴薯粉、淀粉以及各種風味的休閑食品。馬鈴薯營養豐富，因此，對馬鈴薯進行深加工具有重要價值。1.薯類去皮機工作原理1.1去皮清理的原理1水果及塊根、塊莖類蔬菜的外皮在加工成食品之前，大多需要除去表皮。由于原料的種類不同，皮層與果肉結合的牢固程度不同，生產的產品不同，對原料的去皮要求也各異，果蔬去皮的基本要求是去皮完全、徹底、原料損耗少。目前，果蔬加工中常用的去皮方法有機械去皮和化學去皮。機械去皮應用較廣，既有簡易的手工去皮又有特種去皮機。按去皮原理不同可分為機械切削去皮、機械磨削去皮和機械摩擦去皮。(1)機械切削去皮 是采用鋒利的刀片表面皮層。去皮速度較快，但不完全，且果肉損失較多，一般需用手工加以修整，難以實現完全機械作業，適用于果大、皮薄、肉質較硬的果蔬。目前，蘋果、梨、柿等常使用機械切削去皮，常用的形式為旋皮機。旋皮機是將待去皮的水果插在能旋轉的插軸上，靠近水果一側安裝（或手持）一把刀口彎曲的刀，使刀口貼在果面上。插軸旋轉時，刀就從旋轉的水果表面將皮車去。旋皮機插軸的轉動有手搖、腳踏和電動幾種動力形式。在旋車去皮之前應有選果工序，以保證水果大小基本一致。(2)機械磨削去皮 是利用覆有磨料的工作面除去表面皮層。可高速作業，易于實現完全機械操作，所得碎皮細小，便于用水或氣流清除，但去皮后表面較粗糙，適用于質地堅硬、皮薄、外形整齊的果蔬。胡蘿卜、番茄等塊根類蔬菜原料去皮大多采用機械磨削去皮機。(3)機械摩擦去皮 是利用摩擦因數大、接觸面積大的工作構件而產生的摩擦作用使表皮發生撕裂破壞而被去除。所得產品表面質量好，碎皮尺寸大，去皮死角少，但作用強度差，適用于果大、皮薄、皮下組織松散的果蔬，一般需要首先對果蔬進行必要的預處理來弱化皮下組織。常見到的機械摩擦去皮機如采用橡膠板作為工作構件的干法去皮機。(4)化學去皮 又稱堿液去皮，即將果蔬在一定溫度的堿液中處理適當?shù)臅r(shí)間，果皮即被腐蝕，取出后，立即用清水沖洗或搓擦，外皮即脫落，并洗去堿液。此法適用于桃、李、杏、梨、蘋果等的去皮及橘瓣脫囊衣。桃、李、蘋果等的果皮由角質、半纖維素等組成，果肉由薄壁細胞組成，果皮與果肉之間為中膠層，富含原果膠及果膠，將果皮與果肉連接。當果蔬與堿液接觸時，果皮的角質、半纖維素被堿腐蝕而變薄乃至溶解，果膠被堿水溶解而失去膠凝性，果肉薄壁細胞膜較能抗堿。因此，用堿液處理后的果實，不僅果皮容易去除，而且果肉的損傷較少，可以提高原料的利用率。但是，化學去皮用水量較大，去皮過程產生的廢水多，尤其是產生大量含有堿液的廢水。1.2去皮設備10：離心擦皮機,離心擦皮機是一種小型間歇式去皮機械。依靠旋轉的工作構件驅動原料旋轉，使得物料在離心力的作用下，在機器內上下翻滾并與機器構件產生摩擦，從而使物料的皮層被擦離。用擦皮機去皮對物料的組織有較大的損傷，而且其表面粗糙不光滑，一般不適宜整只果蔬罐頭的生產，只用于加工生產切片或制醬的原料。常用去皮機處理馬鈴薯、胡蘿卜、番茄等塊根類蔬菜原料1。 圖1-1 去皮機結構1- 機座 2-電機安裝支座 3電動機 4主動齒輪 5從動齒輪 6軸 7軸承座 8、9、10軸承 11圓盤 12圓筒 13排污口 14卸料口去皮機（如圖1-1）由工作圓筒12、旋轉圓盤11、卸料口14、排污口13及傳動裝置等部分組成。工作圓筒內表面是粗糙的，內表面焊有直徑10mm的鋼棒，然后植金剛砂；圓盤采用風扇葉片式結構設計，采用金剛砂黏結表面，具體會在后面零件介紹中講解。圓盤這種結構特點除兼有去皮功能外，主要用來拋起物料，當物料從加料口落到旋轉圓盤凹凸表面時，因離心力作用被拋至圓筒壁，與筒壁粗糙表面摩擦達到去皮的目的。去皮工作時，水通過噴嘴送入圓筒內部，卸料口的閘門由把手鎖緊，擦下的皮用水從排污口排去，已去皮的物料靠離心力的作用從打開閘門的卸料口自動排去。為了保證正常的工作效果，這種去皮機在工作時，不僅要求物料能夠完全拋起，在擦皮室內呈翻滾狀態，不斷改變與工作構件間的位置關系和方向關系，便于各塊物料的不同部位的表面被均勻去皮，并且要保證物料能被拋至筒壁。因此，必須保證足夠高的 圓盤轉速，同時擦皮室內物料不得填充過多，一般選用物料充滿系數為0.50.65，依次進行生產率的計算。 2軸的設計一切作回轉運動的傳動零件（例如本設計中的齒輪和圓盤），都必須安裝在軸上才能進行運動及動力的傳遞。軸的主要功用是支承回轉零件及傳遞運動和動力。軸的設計包括結構設計和工作能力計算兩方面的內容。軸的結構設計是根據軸上零件的安裝、定位以及軸的制造工藝等方面的要求合理地確定軸的結構形式和尺寸。軸的結構設計不合理，會影響軸的工作能力和軸上零件的工作可靠性，還會增加軸的制造成本和軸上零件裝配的困難度。軸的工作能力計算指的是軸的強度、剛度和振動穩定性等方面的計算，多數情況下，軸的工作能力主要取決于軸的強度。21軸的材料軸的材料主要是碳鋼和合金鋼。由于碳鋼比合金鋼價廉、對應力集中的敏感性較低，同時也可以用熱處理或化學熱處理的辦法提高其耐磨性和抗疲勞強度，故采用碳鋼制造軸尤為廣泛，其中最常見的是45鋼。查機械設計表11.1“軸的常用材料及其主要機械性能”，可選擇軸的材料為45鋼，熱處理方法采用正火。相關機械性能如下：毛坯直徑100mm，硬度170217HBS，抗拉強度極限為590M，屈服強度極限為295M，彎曲疲勞極限為255M。22軸的強度計算 進行軸的強度校核計算時，應根據軸的具體受載及應力情況，采取相應的計算方法，并恰當?shù)剡x取其許用應力。對于僅僅（或主要）承受扭矩的軸（傳動軸），應根據扭轉強度條件計算。對只受扭矩或主要承受扭矩的傳動軸，應按扭轉強度條件計算軸的直徑。若有彎矩作用，可用降低許用應力的方法來考慮其影響。扭轉強度條件為： （1） 式中 -軸的扭轉切應力，M； T-軸所受的扭矩，N.mm ； -軸的抗扭截面模量，m；n-軸的轉速，r/min ；p-軸所傳遞的功率，kw ；-軸的許用扭轉切應力，M 。對實心圓軸，=/16/5，以此代入式（1），可得軸的直徑， d=c (mm)(2) c為取決于軸材料的許用扭轉切應力的系數，其值可查機械設計表11.3“幾種軸的材料的和C值”，可得45鋼的為3040，C值為118107。在這里，取C值為116代入式子（2） 得：d 其中p等于0.50KW，n等于320r/min.所以，d=15.40 mm 考慮到軸上開鍵槽和切制螺紋，為了補償軸的削弱，按上式計算的軸應適當取大些。取軸的最小直徑為20mm。23軸的結構尺寸初步確定 1車螺紋，與螺釘聯接，用于防止圓盤在旋轉工作時向上軸向移動。2銑鍵槽，與圓盤聯接。3與封油擋圈聯結，擋圈有防水防塵的作用，保護軸承；同時，擋圈下面壓著唇形密封圈，使?jié)櫥驮趥鲃?dòng)裝置內得到充分利用。4依次安裝深溝球軸承和單向推力球軸承，兩軸承之間裝有隔套，這樣可以保證軸承轉動而不至于摩擦力大卡死。5注意其尺寸特點，其直徑比兩端稍小12個毫米，這樣有助于軸承的安裝，同時表面粗糙度要求不高，減少加工量。6安裝深溝球軸承，也得安裝一個唇形密封圈。7聯接圓螺母，該螺母具有自鎖功能，起到固定上面深溝球軸承的作用。8銑鍵槽，與大齒輪聯接9車螺紋，與螺釘聯接，起防止從動齒輪向下移動的 3.滾動軸承的設計常用的滾動軸承絕大多數已經標準化，并由專業工廠大量制造及供應各種常用規格的軸承。本節將根據具體的工作條件正確選擇軸承的類型和計算所需的尺寸。滾動軸承利用滾動體將軸于外部構件分隔開，從而用滾動摩擦代替了滑動摩擦。軸承的內、外圈和滾動體，一般是用軸承烙鋼制造的，熱處理后，硬度一般不低于60HRC，這些元件一般都經過150攝氏度的回火處理，所以通常當軸承的工作溫度不高于120攝氏度時，元件的硬度不會下降10。3.1.滾動軸承類型的選擇 查機械設計表8.1“滾動軸承的主要類型、尺寸系列代號及其特征（GB/T272-93），根據本設計的結構要求和受力情況分析，選擇一個單向推力軸承和一對深溝球軸承配合使用。（1） 單向推力球軸承.結構簡圖、承受負荷方向： 特性：推力球軸承的套圈與滾動體多半是可分離的，單向推力球軸承只能承受單向的軸向負荷，兩個圈的孔不一樣大：內孔較小的是緊圈，與軸配合；內孔較大的是松圈，與機座固定在一起。極限轉速較低，適用于軸向力大而轉速較低的場合。沒有徑向限位能力，不能單獨組成支承，一般要與向心軸承組成組合支承使用。（2） 深溝球軸承.結構簡圖、承受負荷方向：特性：主要承受徑向負荷，也可同時承受少量的雙向的軸向負荷，工作時內外圈軸線允許偏斜-。摩擦阻力小，極限轉速高，結構簡單，價格便宜，應用最廣泛，但軸承沖擊負荷能力較差。3.2.滾動軸承部件的組合設計.要想保證軸承順利工作，除了正確選擇軸承類型和尺寸外，還應正確設計軸承裝置。軸承裝置的設計主要是正確解決軸承的安裝、配合、緊固、調節、潤滑、密封等問題10。1-油封擋圈，與工作軸之間采用間隙配合。2深溝球軸承，能承受較大徑向力，只能承受較小的軸向力。3隔套，非標準件，根據設計要求選擇材料，確定尺寸。4單向推力球軸承，能承受較大軸向力，沒有徑向限位功能。5唇形密封圈，用于封油。6隔套，同3。7深溝球軸承 此外，軸承組合結構設計要合理，保證充分的潤滑和可靠的密封，對提高軸承的壽命和保證正常工作是非常重要的。4.電動機的選擇電動機選擇要考慮多方面因素，根據電動機的功率、轉速、結構特點、應用場合和安裝方式，查相關資料選擇合適的電動機。查閱機械零件設計手冊相關內容如下：Y系列（IP44）封閉式籠型三相異步電動機.1） 結構特點：采用封閉自冷式結構，能防止任何方向的濺水對電動機的影響，一般只有一個軸伸端。2） 性能及特點：電動機效率高、耗電少、性能好、噪聲低、振動小、體積小。根據工作軸功率P=550W，轉速=320r/min,可選擇型號為Y90S-6型電動機。型號 額定功率（KW） 轉速（r/min） 電流（A） 效率（%） 功率因數 重量（kg）Y90S-6 0.75 910 2.25 72.5 0.75 23運行可靠，維修方便，絕緣等級為B級。3） 應用場合：農用機械、食品機械、攪拌機、磨粉機等。 根據電動機的型號，查機械手冊確定電動機的安裝方式并確定電動機的外形尺寸和安裝尺寸，然后合理地把電動機安裝在機架上。5.齒輪的結構設計 齒輪傳動是機械傳動中最重要、應用最廣泛的一種傳動。其優點是：傳動效率高、工作可靠、使用壽命長、傳動比準確、結構緊湊和功率和速度使用范圍廣。齒輪傳動應滿足如下的基本要求：1.傳動平穩，要求瞬時傳動比不變，盡量減小沖擊、振動和噪聲，保證較高的運動精度。2.承載能力高，要求在尺寸小、重量輕的前提下，齒輪的強度高、耐磨性好，能達到預定的工作壽命。在齒輪設計時，只要齒輪設計合理，齒輪材料及熱處理選擇合適，制造質量高，達到規定的制造精度，就能達到預定的功能要求。 表5-1 漸開線圓拄齒輪基本齒廓（GB/T1356-2001）7 參考機械原理第七版相關資料：標準齒輪是指m、a、均取標準值，具有標準的齒頂高和齒跟高，而且分度圓齒厚等于齒槽寬的齒輪。GB1356-88中規定分度圓壓力角的標準值為a=和分別稱為齒頂高系數和頂隙系數，GB1356-88中規定其標準值為： =1 =0.255.1.齒輪材料及熱處理由齒輪傳動的失效形式可知，設計齒輪傳動時，應使齒面具有較高的抗磨損、抗點蝕、抗膠合等能力，而齒根要有較高的抗折斷的能力。因此，對齒輪材料性能的基本要求為：齒面應有足夠的硬度，而齒芯要有一定的韌性。選擇45鋼，熱處理方式采用表面淬火，HRC（齒面）40-50，齒輪加工精度為9級.5.2.齒輪相關參數的初步確定根據相關設計要求和資料可初步確定齒輪的某些參數，然后對齒輪進行齒面接觸疲勞強度計算和齒根彎曲疲勞強度計算，如果強度符合要求，則選用這些參數；如果強度不符合要求，則需再修改這些參數。1.參考機械原理，漸開線標準齒輪不發生根切是的最小齒數=，用標準齒條形刀具切制標準齒輪時，因a=及=1，則=17.2. 查機械零件設計手冊表15-2“漸開線圓柱齒輪模數（GB/T1357-1987）”，本設計可選擇模數m有：1、1.25、1.5、2、2.5、3.3.根據主動齒輪轉速（即電動機轉軸轉速）和從動軸轉速（即工作軸轉速）可確定傳動比和齒輪齒數比。=910r/min, =320r/min.在這里，取模數m=2mm. 主動齒輪齒數=25，分度圓直徑=m=50mm. 從動齒輪齒數=68，分度圓直徑=m=136mm. 取齒輪寬度系數為0.2，則有： 從動齒輪寬度=136*0.2=27.2，取=25mm. 為了防止兩齒輪因裝配后軸向稍有錯位而導致實際嚙合齒寬的減少，常使大齒輪（這里是從動齒輪）寬度=；小齒輪（這里是主動齒輪）寬度=+510mm 所以，主動齒輪寬度=25+5=30mm.5.3.校核齒輪強度齒面接觸疲勞強度，齒根彎曲疲勞強度.下面設計過程中，所查的圖、表均可以查閱機械設計.a.確定許用應力 查圖6.14，得=1100 M；查圖6.15，得=300 M， 查表6.5，得=1.1，=1.5，u=/=68/25=2.72 N=60J 式中為齒輪轉速.r/min,J為每轉一圈時同一齒面的嚙合次數；為齒輪的工作壽命.h; 所以，=60*910*1*5*12*250=8.19* =/u=8.19*/2.72=3.01* 查圖6.16，得=1，查圖6.17得=1. =1000 M， =300*2*1/1.5=400 M，b.驗算齒面接觸疲勞強度條件. 計算工作轉矩： T=9.55*=9.55*=7870.88 Nmm 確定載荷系數K：由表6.2查得=1.5；由9級齒輪精度，取=1.32；由硬齒面，非對稱布置，取=1.2，=1.1則K=1.5*1.32*1.2*1.2=2.61 查圖6.12，得=2.5；查表6.3，得=188.0，因齒數較少，取=0.86所以，=2.5*188.0*0.68 =621.85 M齒面接觸疲勞強度滿足要求.c.驗算齒根彎曲疲勞強度條件查表6.4得，=2.62，=1.59，=2.24，=1.75，取=0.82，則：=*2.62*1.59*0.82=82.54 M1000 M，=*/=81.24 M1000 M，兩齒輪的齒根彎曲疲勞強度均滿足要求?？偨Y(jié)：齒輪傳動設計的主要內容包選擇齒輪材料和熱處理、確定精度等級和主要參數。設計過程是先由設計準則確定強度條件，再由強度條件確定齒輪的大?。ǚ侄葓A直徑或模數），并可進一步計算出多組能滿足強度條件的齒輪主要幾何尺寸。根據設計要求，從多組齒輪參數中選擇較優秀的作為最終的齒輪參數。最后設計出齒輪的結構，并繪制齒輪的零件工作圖。 每次機械設備結構的設計都是在以前該類設備結構上的技術升級，在參考以前同類設備的結構特點的同時，在某些零件或在某些技術環節上加上自己的創新點，使自己設計后的產品在同類產品中更具有技術上、價格上的競爭力。下面將介紹本設計中，在三個零件上于以往同類機械設備的不同處。6.圓筒的結構設計 圖6-1 圓筒的結構1-不銹鋼棒 2圓筒壁 3與法蘭聯接部分 4、5圓筒蓋組件圓筒的結構特點主要體現在內壁，內壁均勻地焊接二十個直徑為10mm的不銹鋼棒，然后在整個圓筒內壁植金鋼砂（包括在不銹鋼棒上），這種結構特點更有利于對農產品的去皮，特別是對薯類農產品。第一，由于不銹鋼棒的存在，物料在圓筒內旋轉時會不斷的翻滾，這樣，就能對物料各個面進行去皮，達到均勻去皮的效果。第二，對于像薯類這樣的農產品，由于有些地方凹凸，在去皮工作時就有死點，往往有些地方?jīng)]有去皮，對于要求高的去皮效果，就要采用手工去皮的方法來處理這些死點，而采用不銹鋼棒焊接內壁，當薯類農產品在翻滾去皮工作時，當凹進去的地方剛好碰到直徑為10毫米的不銹鋼棒，照樣可以達到良好的去皮效果。圓筒與清理槽之間采用法蘭聯接。值得注意的是，圓筒蓋組件和不銹鋼棒都是焊接在圓筒上，而且圓筒壁上要開卸料口。筒蓋組件和不銹鋼棒焊接時，應先把它們都擺好在其焊接的位置，同時焊接，這樣做可以使焊接后變形均勻而且變形量小；再者，應先焊接好圓筒蓋組件和不銹鋼棒之后，再在筒壁上開卸料口，如果先開卸料口再焊接，會使圓筒變形量增大、變形不均勻和應力不均勻，這樣，影響圓筒零件的質量。7.軸承座的結構設計軸承座在設計中是至關重要的一部分，它是整個機械設備的傳動部分，軸承座結構設計的合不合理會影響設備的傳動精度，此設計中，將整個傳動部分，包括軸承座、軸承、齒輪以及密封圈可組裝在一起，做一個單獨的零件使用，這種設計可使整個傳動部分更加牢靠地結合在一起，而且便于拆卸。 圖7-1 軸承座 圖7-2 軸承座總成圖7-1表示了軸承座的尺寸和結構特點，圖7-2表示了軸承座與轉動軸、軸承、從動齒輪及密封圈等的裝配和關系。軸承座總成可以看做一個單獨的零件安裝在清理槽上，這種結構便于安裝、拆卸，而且結構緊湊，在傳動工作時傳動平穩、振動小、噪聲小。圖7-2中，9表示潤滑油口。8.圓盤的結構設計圓盤的結構特點決定圓盤的作用，在設計中要求圓盤能夠有去皮功能外，還要有拋起物料的作用，當物料從加料口進入圓盤內后，物料首先落到圓盤上，圓盤隨著工作軸轉動，物料也在圓盤上旋轉翻滾，采用怎樣的圓盤結構才能使物料在圓盤上旋轉的同時可以被拋起呢？這里可以模仿風扇葉片式結構。 圖8-1 圓盤如上圖所示，圓盤由三部分焊接而成，圓盤上表面都是金鋼砂黏結表面，有去皮的功能，起拋起物料作用的是上面的凹凸葉片式結構，在旋轉工作時，物料順著向上的面拋起。 參 考 文 獻1.張?jiān)Ｖ兄骶?，食品加工技術裝備M.第二版，中國輕工業出版社，2007.2.郭順堂、謝焱主編，食品加工業M，化學工業出版社，2005.3.崔建云主編，食品機械M，化學工業出版社，2007.4.張燕萍、謝良主編，食品加工技術M，化學工業出版社，2006.5.徐幸蓮、彭增起、鄧尚貴主編，食品原料學M，中國計量出版社，2006.6.譚建榮、張樹有、陸國棟、施岳定主編，圖學基礎教程M，高等教育出版社，1999.7.吳宗澤主編，機械零件設計手冊M，機械工業出版社，2003.8.楊景蕙、陸玉、唐蓉城主編，機械設計M.第二版，機械工業出版社，1996.9.鄭文緯、吳克堅主編，機械原理M.第七版，高等教育出版社，1997.10.楊明忠、朱家誠主編，機械設計M，武漢理工大學出版社，2001.11.唐照民、汝元功主編，機械設計手冊M，高等教育出版社，1995.12.余桂英、郭紀林主編，AutoCAD 2006中文版實用教程M，大連理工大學出版社，2006.致謝值此論文完成之際，謹向在課題研究和論文撰寫過程中指導和幫助過我的老師和同學們致以誠摯的謝意。本文是在導師張廬陵老師細致的指導和嚴格的要求下完成的。導師以深厚的理論功底和過人的科研智慧為學生指明了設計方向，傳授給學生科學研究的方法，并且嚴格細致地糾正我設計中的疏漏之處，而他們身先士卒的實干精神和一絲不茍的治學態度更是令我由衷的敬佩。在論文寫作期間，無論在文字和內容上，導師都給了精心的指導，學生受益匪淺。在此，學生向?qū)煴硎局孕牡母兄x并致以最深的謝意。在論文完成過程中，還得到過涂敏、羅星、裴小斐、肖健等同學的幫助，在此表示衷心的感謝，感謝同學們?cè)诶碚撝R(shí)、設計材料上給予的方便和建議。最后向關心和支持我的設計和論文工作的朋友們表示衷心的感謝。金道煌于江西農業大學 2009年5月 輕型立式薯類去皮機結構設計輕型立式薯類去皮機結構設計 設計者：設計者：金道煌金道煌 指導老師：指導老師：張廬陵張廬陵 班班 級：級：機制機制052052班班 學學 號：號：2005042620050426去皮機的設計程序去皮機的設計程序去皮機的工作原理去皮機的工作原理創新設計點創新設計點圓筒的機構設計圓筒的機構設計圓盤的結構設計圓盤的結構設計軸承座的結構設計軸承座的結構設計去去皮皮機機工工作作原原理理示示意意圖圖1 1底座底座 2 2電機安裝支座電機安裝支座 3 3電動機電動機 4 4主動齒輪主動齒輪 5 5從動齒輪從動齒輪 6 6軸承座軸承座 7 7清理槽清理槽 8 8、9 9、1010軸承軸承 1111圓盤圓盤 1212 圓筒圓筒 1313排污口排污口 1414卸料口卸料口創新設計思想創新設計思想 我設計的去皮機對某些關鍵零件和傳動裝置進行了合理地改進，例如對圓筒和圓盤的結構改進、對傳動裝置的改進，大大提高了去皮效果，而且去皮均勻，以往難去皮的凹面也得到了很好的去皮，該設備具有適用范圍廣，效率高，能耗低，堅固耐用，價格低廉。圓筒的設計圓筒的設計相比以前去皮機結構，該圓筒的特點在于：圓相比以前去皮機結構，該圓筒的特點在于：圓筒的內壁均勻地焊接20根直徑為10mm的不銹鋼棒，而且筒的內壁（包括不銹鋼棒）是金鋼砂黏結表面，這種結構可以提高去皮的工作效率，而且對薯類農產品凹表面也能達到很好的去皮效果，解決了以往還要手工去凹面皮層的問題。圓盤設計圓盤設計 在去皮機中，圓盤是個重要零件，它不僅要具備去功能，而且要求它獨特的結構能夠在旋轉工作時將物料拋起，從而使物料與圓筒內壁接觸，達到進一不的去皮效果，所以，采用什么樣的圓盤結構能達到這兩點是圓盤設計中至關重要的一點。本設計，模仿風扇葉片式結構，來設計了一個合理的圓盤。具體結構如下：圓盤結構簡圖圓盤是焊接件，與軸聯接，上表面是工作面，上表面是金鋼砂黏結表面，葉片式薄鋼具有去皮的作用外，還能很好地把物料向上拋起。軸承座的結構設計軸承座的結構設計 軸承座是安裝軸承、軸、及軸類零件的裝置，往往軸承座是機械設備很重要的傳動部分。軸承安裝在軸承座上、軸安裝在軸承上、齒輪安裝在軸承上，這些都要考慮很精確地安裝尺寸，同是還要考慮密封問題、潤滑問題及各類組件使用、安裝問題。對于很重要的傳動部分，要求結構緊湊、傳動平穩。本設計中設計的軸承座與軸承、軸等零件安裝后可做為一個整體，便于拆卸，而且結構緊湊。具體，如下頁圖。軸承座軸承座總成請各位老師批評指正！請各位老師批評指正！謝謝 謝！謝！A simplified twin screw co-rotating food extruder: design, fabrication and testingS.A.M.A.N.S. Senanayake a, B. Clarke b,* Division of Agricultural and Plantation Engineering, The Open University of Sri Lanka, Nawala, Nugegoda, Sri LankaDepartment of Postharvest Technology, School of Agriculture, Food and Environment, SilsoeCollage, Cranfield University, Silsoe, Bedfordshire MK45 4DT,UKReceived 6 July 1998; accepted 10 February 1999AbstractA simplified co-rotating twin screw food extruder was designed, fabricated and tested in England, followed by extensive testing in Sri Lanka. It was built as a model to meet the specific product and financial constraints of less developed countries and was expected to be used in those countries to widen the production capabilities of extruded foods. The machine had an estimated delivery of 10 kg/h and was made mainly with mild steel. Two types of screw were made, one with a constant pitch of 14 mm and the other with varying pitch in segments of 14, 12 and 10 mm. The machine was powered by a 2.2 kW electric motor with electronic speed control .The machine also had electrical heating with a temperature controller and a pressure sensing device. The cost of fabrication of themachine was estimated at 2000 with most of the parts built in a fairly simple workshop. A mixture of rice and dried banana was successfully extruded as a potential snack food and on the basis of maximum expansion the best results was obtained from a barrel temperature of 120C, screw speed 125 rpm, feed moisture 15% and with a die orifice size of 3 mm. When the alternative compress ion screw was tested very similar results were achieved with no significant improvement in product expansion. 1999 Elsevier Science Ltd. All rights reserved.Keywords: Twin screw extruder; Design; Low cost; Snack food; Continuous cooker; Local construction; Cereal mixturesNomenclaturea Die diameter (mm)B Channel width (mm)C Screw circumference (mm)d Screw core diameterD Outer diameter of screws (mm)H Flight depth (mm)M Moisture content (% wet basis)n Number of fight turnsN Speed angular (rev/min)p Pitch (mm)Q Delivery rate (mm3/min)S Total helical length of screws (mm)t Temperature ()T Residence time (min)a Overlap angle of screw fights (degrees)d Calender gap (mm)e Side clearance (mm)q Product density (g/mm3 )/ Helix angle (degrees)* Corresponding author. Fax: +01525-863277; e-mail: b.clarkecran-eld.ac.uk0260-8774/99/$ see front matter1999 Elsevier Science Ltd. All rights reserved.PII: S 0 2 6 0 - 8 7 7 4 ( 9 9 ) 0 0 0 4 9 71. IntroductionExtrusion cooking is finding ever increasing applications in the food process industry. Apart from providing a means of manufacturing new products, it has successfully revolution is many conventional manufacturing processes (Harlow, 1985, Frame, 1994). Today, extruders come in a wide variety of sizes, shapes and method of operation. There are three types of food extruder found in industry: hydraulic ram, roller and screw type extruders (Frame, 1994). The screw extruders are very different to the other two having special features such as continuous processing and mixing ability. Single and twin screw types are both widely used in the food process industry. Unfortunately, most of the food extruders available in the market are either so costly that less developed countries cannot afford to buy them except by some form of assistance or outside investment or else are not appropriate for the wide variety of materials that need to be processed. As a result the growth of extrusion technology of food into these countries has been hindered despite its many advantages. Fig. 2. Plan drawing of the twin screw extruder with drive system. 1-V belt pulley, 2-gear box, 3-food seal, 4-ange clamp bolt, 5-die plate, 6-die, 7-two segments of the extruder chamber, 8-extruder screw.were made so that they could be externally screwed to the die plate.2.5. Drive system The machine was driven by an electric motor of 2.2kW using a twin belt drive between the motor and a gearbox shown in Fig. 2. The speed reduction in the box was2.08 while an electronic speed controller was used to control the speed continuously over the range required.Fig. 3. Front portion of barrel showing provision for heaters, temperature and pressure sensors. 1-slots for heaters, 2-end flanges, 3-side flanges to barrel, 4-hole for pressure sensor, 5-twin holes to form the barrel.2. Motor powerIn twin screw extruders the motor power is utilized mainly to compress and shear the food dough that squeezes through various gaps in the intermeshing screws and the gap between the screws and the barrel. When dealing with a wide range of foods under different process conditions the shear resistance can vary widely because of changes in the rheological behaviour which would prevent accurate estimate of the motor power. Owing to the unknown character therefore of the novel materials a motor power was selected based on that used for similar materials in similar sized extruders with a safety margin and from exploratory trials in the Brabender extruder. Rossen and Miller (1973) give a range of specific energy consumption figures for different extruders which ranged from 0.02 to 0.10 kWh/kg. At 10kg/h throughput this gave a maximum power requirement of 1 kW while the Brabender trials tended to indicatea power requirement of about half of this value. The 2.2 kW, 3 phase AC motor used was amply capable of supplying this power plus all other drive friction losses.3. Gear boxIn the co-rotating extruder the two screw shafts are driven at the same speed in the same direction. The main problem is that they are very close together. The gearbox was designed to drive two pinions, coupled to the shafts by shear pins, by using a gear wheel of more than double the width of the pinions. In this way the two pinions could t side by side driven simultaneously and maximise their diameter space as shown in Fig. 2. Lubricated phosphor bronze thrust bearings were used to resist the axial load generated by the material along the shaft.2.6. Heating and temperature controlHeating of the barrel to give necessary thermal input for cooking the food was done by two sets of cartridge heaters having capacities of 800 and 1200 W. The heaters were positioned in the grooves made on the top and bottom of the barrel towards the die end as shown in Fig. 3. A single temperature controller was set up together with a thermocouple to sense the temperature inside the barrel very close to die plate. Owing to the shortness of the barrel only one thermocouple was considered necessary. In an early design heaters were also used near to the feed hopper but were not used as they tended to cause premature gelatinization of the starch and blockage of the feed.4. Pressure sensorPressure measurements are not so important in the commercial production processes as it cannot be directly controlled to monitor the product characteristics. Neither was such a device needed as a safety measure as this was covered by an overload cut out on the electrical supply. However, in experimental work the measurement of pressure is useful to ascertain the relationship between the pressure and the other controllable parameters such as die size, temperature, moisture content and speed. In this study, a device was built using strain gauges mounted on a small cantilever beam in order to measure the pressure inside the extruder barrel (Fig. 4). A four arm strain gauge bridge was fixed at the point of maximum bending moment. The pressure was tapped from a small hole made in the die end of the barrel in which a plunger, sealed by an O-ring, actuated the cantilever beam to transmit the pressure force. The strain in the beam was detected as a voltage difference. This feature could have been used as an automatic safety cut-out but reliance was placed instead on belt slip in the initial drive stage and the motor itself had an overheating cut-out.Fig. 4. Position of pressure and temperature sensors on the extruder barrel. 1-location of strain gauges on the pressure sensor, 2-cantilever support to plunger, 3-temperature sensor.5. Testing and evaluationA range of rice and banana mixtures were selected as being both novel yet having high potential as processed foods in Sri Lanka. These materials are cheap and common crops in most developing countries and represent an opportunity to produce an attractive, nutritious and tasty snack food. This would provide labour, utilisation of excess perishable fruits in season and a means of storing them for at least one year in appropriate packages. The main product qualities were assessed as part of the same programme and shown to be satisfactory by Gamlath (1995). The rice was prepared in the form of grits (800 lm) and the banana was dried and milled to a similar sized powder which was mixed and flood fed from the feed hopper. Extrusion trials were carried out as given below. Sixteen combinations ofvariable levels were studied in two sets of experiments. In both sets the throughput was measured when the flow became stable.Initial trials indicated no significant difference in performance due to the variable pitch screws as a means of compressing the feed so all subsequent trials and the results quoted in this paper are for the fixed pitch screws. The extrudate diameter was measured using a vernier calliper immediately after extrusion and before any further drying took place which could cause some further reduction in ratio but not to affect the general result. All tests were replicated three times making 48 individual trials carried out in a fully randomised formatExperiment 1Fixed settings:Speed (N) 125 rev/minDie size (a) 5 mm diameterVariables:Barrel temperature (t) two levels (100C and 120C)Feed moisture content (M) four levels (15%, 20%,25%, 30%)Experiment 2. This experiment was carried out using fixed settings of barrel temperature and the feed moisture determined in experiment 1 on the basis that maximum product expansion represented the best quality.Fixed settings:Barrel temperature (t).120CFeed moisture content (M).15%6. Testing and evaluationA range of rice and banana mixtures were selected as being both novel yet having high potential as processed foods in Sri Lanka. These materials are cheap and common crops in most developing countries and represent an opportunity to produce an attractive, nutritious and tasty snack food. This would provide labour, utilisation of excess perishable fruits in season and a means of storing them for at least one year in appropriate packages. The main product qualities were assessed as part of the same programme and shown to be satisfactory by Gamlath (1995). The rice was prepared in the form of grits (800 lm) and the banana was dried and milled to a similar sized powder which was mixed and flood fed from the feed hopper. Extrusion trials were carried out as given below. Sixteen combinations ofvariable levels were studied in two sets of experiments. In both sets the throughput was measured when the flow became stable.Initial trials indicated no significant difference in performance due to the variable pitch screws as a means of compressing the feed so all subsequent trials and the results quoted in this paper are for the fixed pitch screws. The extrudate diameter was measured using a vernier calliper immediately after extrusion and before any further drying took place which could cause some further reduction in ratio but not to affect the general result. All tests were replicated three times making 48 individual trials carried out in a fully randomised formatExperiment 1Fixed settings:Speed (N) 125 rev/minDie size (a) 5 mm diameterVariables:Barrel temperature (t) two levels (100C and 120C)Feed moisture content (M) four levels (15%, 20%,25%, 30%)Experiment 2. This experiment was carried out using fixed settings of barrel temperature and the feed moisture determined in experiment 1 on the basis that maximum product expansion represented the best quality.Fixed settings:Barrel temperature (t).120CFeed moisture content (M).15%Table 1Results of Experiment 1 (Die orifice diameter=5 mm, screw speed=125 rpm)Temperature (C) Feed moisture (%) Throughput (g/s) Expansion ratio Pressure (MN/m2)100 15 3.76 1.01 2.97 100 20 2.56 1.00 2.38 100 25 2.04 1.00 1.83 100 30 1.25 1.00 1.38 120 15 2.16 1.06 2.91 120 20 2.00 1.05 2.07 120 25 1.18 1.01 1.59 120 30 1.02 1.00 1.38Variables:Die orifice diameter (a) two levels (3, 4 mm)Speed (N) four levels (100, 125, 150, 175 rev/min)4. Results and discussion4.1. Machine performanceGenerally the extruder performed very satisfactorily.The extrudates produced by the machine were fairly well expanded. During extrusion operations it did not become necessary to dismantle the barrel lengthways by splitting into two halves as it never seized up. In order to clean the screw and barrel the latter barrel was very easily pulled o. from the screws within a few minutes after extrusion. This was in part due to a shorter than usual barrel length. This suggests that the horizontal splitting of the barrel was not essential which would make the machining process of the barrel far easier. No serious difficulties were encountered as far as the operation of the machine is concerned, except initial feedingproblems due to a temperature rise close to the feed hopper. This happened because some heaters were installed a little too close to the feed point so these were later removed and the difficulties were overcome as mentioned earlier. Many extruders have cooling facilities in this region but these were not found to be necessary. Those heaters further from the feed point and close to the die end proved to be sufficient to gelatinize the rice grits. The extrudate was observed to change from a powder at feed to a continuous, expanded extrudate at exit although quantitative assessments of the degree of gelatinization were not carried out.7. Extruder settings and product characteristicsIt can be seen from Table 1 and Fig. 5 that the throughput dropped with each increase of feed moisture content at both the barrel temperatures used. When the feed moisture was increased from 15% to 30%, the throughput was reduced by 66.8% and 52.7% at 100 and 120barrel temperatures, respectively. This effect was probably caused by an increase in backflow allowed by the reduced viscosity which the increase in moisture produced. Another important observation made was the variation of product expansion with the pressure and feed moisture content. The expansion was found to be highest at the lowest moisture content with associated highest pressures (Fig. 6) and a steady reduction in both expansion ratio and pressure as moisture content increased. The product was well gelatinised but with low expansion ratio. The second series was designed to test a wider range of parameters and if possible increase the expansion ratio which was thought to depend on the die diameter.The results of Experiments 2 are tabulated in Table 2 below.Fig. 5. Throughput as a function of feed moisture content with die diameter 5 mm and screw speed 125 rev/min.Fig. 6. Pressure and expansion ratio as a function of feed moisture content at feed moisture 15%, die diameter 5 mm and screw speed 125 rev/minFig. 7 and Table 2 show that the throughput increased with the speed due to increased rate of material conveyance. The pressure changes with screw speed was not found to be significant. The product expansion, however, showed a downward trend with the increase of speed as evident from Fig. 8. This reduction can be attributed to the reduction of pressure and lower degree of gelatinization due to reduced residence time. At settings of 125 rpm, feed moisture 15%, temperatures 120C, die size 3 or 4 mm diameter a very acceptable product was achieved.The overall performance of the machine was found to be quite satisfactory in achieving all the parameter settings and measurements required. Each trial only lasted a few minutes in running time which was mainly spent in reaching equilibrium conditions indicated by the temperature reading but after 48 trials no significant wear was observed even though the prototype was in mild steel.Cleaning and maintenance was quick and simple and in the event of a complete seizure of the screws the barrel could be split on this machine.The gearbox was of a bolted construction to permit modifications but future designs should be welded together. The 2.2 kW motor was found to be amply capable and most of the time it only consumed about 0.5kW. No mechanical breakdowns were experienced.The prospects for use of this design in developing countries seem to be good from these experiments. Scale up to a higher capacity would bring some difficulties as discussed by Levine (1989); Singh, Smith and Frame (1998) and Yacu (1992) and although these issues were not addressed they are not considered to be insurmountable.Fig. 7. Throughput as a function of speed with feed moisture 15% and barrel temperature 120C.Fig. 8. Pressure and expansion ratio as a function of speed with 3 mm die size, feed moisture 15% and barrel temperature 120C.8. ConclusionsThe following conclusions were made from this study. Simplified extruders for specialised applications can successfully be made and operated in less developed countries to process local food materials. All components can be made in an unsophisticated workshop except gears, seals, motor, temperaturesensor and heaters. Simple machining processes such as drilling and boring can be used to produce twin holed barrels to accommodate the intermeshing screws. Horizontal splitting of the barrel is not essential in this type ofmachine so that fabrication of the barrel for these machines can be simple enough for developing country manufacture. A simple construction of gear box, using straight spur gears driven by a single large gear wheel is quite adequate to run the twin screws in the same direction. An attractive and acceptable snack food was produced from the prototype machine from mixture of cereals and fruits.ReferencesFrame, N. D. (1994). The technology of extrusion cooking. Blackie Academic and Professional, London.Gamlath, G. G. S. G. (1995). Nutritional, Physico-chemical and sensory evaluation of extruded cereals with perishables. Ph.D. thesis, Cranfield University, Bedford, England.Harlow, N. (1985). Revolutionising a cereal need. Food Processing, pp. 29-30.Harper, J. M., & Jansen, G. R. (1985). Production of nutritious precooked foods in developing countries by low cost extrusionTechnology. Food Review International, 1, 27 97.Harper, J. M. (1979). Food extrusion: critical reviews in food science and nutrition. Florida: CRC press.Harper, J. M. (1992). A comparative analysis of single and twin screw extruders. In J. L. Kokini, C.-T. Ho & M. V. Karwe, Foodextrusion science and technology. New York: Marcel Dekker.Hauck, B. W. (1985). Comparison of single and twin screw extruders- 2. Food Trade Review (Suppl. 5-9).Hauck, B. W., & Ben Gera (1987). Single and twin screw extruders. Milling, pp. 1820.Jansen, G. R., & Harper, J. M. (1980). Applications of Low cost ex