購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載就能得到。。?！咀ⅰ浚篸wg后綴為CAD圖，doc,docx為WORD文檔，【有不明白之處，可咨詢QQ:1304139763】
塑料后蓋塑料模具畢業設計 摘要 本課題主要是針對盒蓋的模具設計 通過對塑件進行工藝的分析和比較 最終設 計出一副注塑模 該課題從產品結構工藝性 具體模具結構出發 對模具的澆 注系統 模具成型部分的結構 頂出系統 冷卻系統 注塑機的選擇及有關參 數的校核 都有詳細的設計 同時并簡單的編制了模具的加工工藝 通過整個 設計過程表明該模具能夠達到此塑件所要求的加工工藝 根據題目設計的主要 任務是盒蓋注塑模具的設計 也就是設計一副注塑模具來生產盒蓋塑件產品 以實現自動化提高產量 針對盒蓋的具體結構 該模具是點澆口的雙分型面注 射模具 由于塑件內側有四個小凸臺 無法設置斜導柱 固采用活動鑲件的結 構形式 其優點在于簡化機構 使模具外形縮小 大大降低了模具的制造成本 通過模具設計表明該模具能達到盒蓋的質量和加工工藝要求 關鍵詞 塑料模具 塑料后蓋蓋 模具 Abstract This topic mainly aimed at the mold design of plastic lid Through the analysis and comparison of the plastic product the plastic mold was designed This topic came from the technology capability of product the structure of the mold embarks the pours system the injection molding system and the related parameter examination the mold took shape the partial structures the against system the cooling system all had the detailed design at the same time the processing craft of the mold were simply established Through the entire process of the design indicated this mold can achieve the processing craft which the plastic lid requested Key words plastic mold the plastic lid mold