購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。?！咀ⅰ浚篸wg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
長春工業大學本科畢業設計論文
數控鉆床的主軸、工作臺進給伺服系統設計
楊皓天
（長春工業大學機電工程學院 070111）
[摘要]
隨著先進制造技術的發展和進步，數控加工已成為機加工過程中的一種主流技術。這一技術的運用提高了機加工過程中工作效率和加工精度。數控鉆床就是提高鉆削加工精度和效率的一種很好的機加工工具。本文對數控鉆床進行了設計，采用了普通車床設計的步驟和方法，綜合考慮數控機床的特點。從切削力入手確定主軸及電機，到整個機床的結構設計和機床的控制。最后到對機床初始化程序設計。
本文所做的工作:
1.完成數控鉆床的資料收集與國、內外現狀的調查比較，提出較為可行的方案;
2.完成機床的機械結構設計計算與電氣控制系統設計，初步完成控制系統的軟硬件設計；提交論文及機械系統的裝配與關鍵零部件的相應圖紙及數控系統的硬件圖，同時提交電子文檔;
3.編寫設計計算說明書。
完成了一臺經濟型的數控機床的設計。
[關鍵詞]
數控技術、鉆床、鉆削、計算機控制、單片機
[Abstract] ?
With the manufacturing development, numerical control manufacturing has become one of the major advanced technologies. efficiency and accuracy has been improved in application of the technology. Numerical control auto-drilling machine is a kind of the new machine tools that can improve the machining accuracy and efficiency. The paner has designed for Numerical control auto-drilling machine, using design method of the ordinary lathe, and considering the characteristic of the numerical control machine tools synthetically. cutting force has been calculated, the structural and the control system has been designed. Finally, the software routine has been explored.
This paner has finished major works:
1. Completed a investigation of internal and external of current situation for numerical control multistage-drilling machine, and compared it, put forward a feasible scheme;
2. Completed the mechanical structural design an calculated and designed the electric control system, and finished the software and hardware of the control system tentatively; Submit thesis and the assembly of mechanical system and hardware picture of key spare part and drawing of numerical control system, submit the electronic file at the same time;
3. Write the specification of designing and calculating, has designed an economy numerical control machine tool.
[Keywords]
numerical control machining、drilling machine、drilling、
computer control、single chip computer
2