4S店汽車維修專用升降機設計【雙剪叉式】
4S店汽車維修專用升降機設計【雙剪叉式】,雙剪叉式,汽車,維修,專用,升降機,設計
編號
無錫太湖學院
畢業設計（論文）
相關資料
題目： 4S店汽車維修專用升降機設計
信機 系 機械工程及自動化專業
學 號： 0923092
學生姓名： 武文琦
指導教師： 范圣耀 （職稱：副教授 ）
（職稱： ）
2013年5月20日
目 錄
一、畢業設計（論文）開題報告
二、畢業設計（論文）外文資料翻譯及原文
三、學生“畢業論文（論文）計劃、進度、檢查及落實表”
四、實習鑒定表
無錫太湖學院
畢業設計（論文）
開題報告
題目： 4S店汽車維修專用升降機設計
信機 系 機械工程及自動化 專業
學 號： 0923092
學生姓名： 武文琦
指導教師： 范圣耀 （職稱：副教授 ）
（職稱： ）
2012年11月25日
課題來源
經老師的介紹在工廠實習，經過幾個月的親身實踐，我對汽車維修專用升降機有了一個系統的了解，因此選擇了自己熟悉的產作為畢業論文的課題。
科學依據（包括課題的科學意義；國內外研究概況、水平和發展趨勢；應用前景等）
（1）課題科學意義
隨著汽車使用量的迅速增加，社會對汽車維修工具和設備的工作效率也越來越高。由此原因，設計一種維修設備，它可根據汽車維修部位的不同而隨時調整汽車的位置，方便維修，減輕維修人員的勞動負荷從而提高工作效率，就成為必然需要。具有結構緊湊，占地面積小，安裝和拆卸操作方便，故障率低，常見故障易處理，維護方便等優點的汽車升降機，就可以滿足汽車維修對提高工作效率的要求。本次畢業設計的題目來源于生產第一線，所設計的產品具有實用價值，已經有成熟產品生產。我們可以參考現有產品做出的改進設計，使產品機構更合理、更實用、更可靠。
（2）汽車升降機的研究狀況及其發展前景
我國每年升降平臺市場成交額高達500億元左右，但其中卻有100多億元的市場被國外升降平臺企業占領。要改變這種現狀，提高升降平臺質量是關鍵。升降平臺在機械產品中占有相當大的比重。據國外工業發達國家統計，升降平臺的產值是壓縮機、風機和泵三者的總和，約占整個機械工業產值的5%。同時，作為重大技術裝備的重要組成部分，尤其是在電力、石化、冶金、城市供排水系統中，升降平臺更是起著關鍵作用，而且用量非常大。目前，我國升降平臺企業約6000余家，其中年產值超過500萬元的有900家。國內上市的升降平臺公司3家，即中核科技、洪城股份、廣東明珠。去年，中核科技主營業務收入2.35億元，洪城股份主營業務收入1.46億元，廣東明珠主營業務收入1.5億元。這些企業，無論是其規模，還是產品質量，目前都無法與國外同類企業抗衡。
目前，國內外升降平臺的發展趨勢主要有以下五個方面：
?（1）升降平臺的全球化趨勢?
（2）以跨國公司為主導，產業鏈細分的趨勢
（3）以科技中心控制升降平臺中心的新趨勢
（4）升降平臺的信息化、虛擬化趨勢
（5）升降平臺的綠色化趨勢向環保化或綠色化方向發展
研究內容
氣液動剪叉式升降平臺具有制造容易、價格低廉、堅實耐用、便于維修保養等特點。在民航、交通運輸、冶金、汽車制造等行業逐漸得到廣泛應用。通過對汽車專用升降平臺的技術參數，結合具體實例，對機構中兩種液壓缸布置方式分析比較，并根據要求對液壓傳動系統個部分進行設計計算最終確定液壓執行元件--液壓缸，通過對叉桿的各項受力分析確定臺板與叉桿的載荷要求，最終完成汽車專用升降平機的設計要求。
擬采取的研究方法、技術路線、實驗方案及可行性分析
研究的內容?
（1）舉升機臺板降到下位時，與地面應盡可能在同一平面上。為此，在保證強度和剛度的前提下，應盡可能降低舉升機臺板和橫梁的高度。在條件許可時，舉升機臺板（或橫梁）應選擇專用型鋼或用鋼板拆彎成形。?
（2）正確選擇傳動方式。采用機械傳動（螺母、螺桿）或液壓傳動（油缸），均?用電動機驅動。機械傳動的成本較高，耗能較多，但安全性較好。?
（3）絲繩的選擇。為了減少滑輪直徑從而縮小寄生機立柱的斷面尺寸，應該選用高柔度的鋼絲繩。鋼絲繩應有較高的安全系數，一般應達8。為此，應增加鋼絲繩鋼絲的數目。這樣，不僅價格便宜，還能減輕鋼絲繩的磨損，延長其使用壽命。
研究計劃及預期成果
研究計劃：
2012年11月12日-2012年12月2日：按照任務書要求查閱論文相關參考資料，填寫畢業設計開題報告書。
2012年12月3日-2013年3月1日：填寫畢業實習報告。
2013年3月4日-2013年3月14日：按照要求修改畢業設計開題報告。
2013年3月15日-2013年3月21日：學習并翻譯一篇與畢業設計相關的英文材料。
2013年3月22日-2013年4月11日：4S店汽車維修專用升降機正文設計。
2013年4月12日-2013年4月25日：繪制裝配圖和零件圖。
2013年4月26日-2013年5月20日：畢業論文撰寫和修改工作。
預期成果：
通過不同方案的比較，以及考慮不同因素的影響，最后確定合理的升降機設計方案，該方案能最大限度的滿足使用要求。
特色或創新之處
（1）對本廠的幾種升降機結構對比，分析優劣。
（2）充分考慮使用環境及使用成本。
（3）采用固定某些參量、改變某些參量來研究問題的方法，思路清晰，簡潔明了，行之有效。
已具備的條件和尚需解決的問題
（1）實驗方案思路已經非常明確，已經具備使用CAD制圖的能力和圖像處理方面的知識。
（2）理論設計的能力尚需加強。
（3）學校收藏了相關資料，網絡工具靈活運用。
指導教師意見
指導教師簽名：
年 月 日
教研室（學科組、研究所）意見
教研室主任簽名：
年 月 日
系意見
主管領導簽名：
年 月 日
Hydraulic system
Chapter 1 Introduction
Hydraulic Pump Station also known as the stations are independent h- ydraulic device.
It requested by the oil gradually. And controlling the hydraulic oil flow direction, pressure and flow rate, applied to the mainframe and hy- draulic devices separability of hydraulic machinery.
Users will be provided after the purchase hydraulic station and host of implementing agencies (motor oil or fuel tanks) connected with tubing, Hydraulic machinery can be realized from these movements and the work cycle.
Hydraulic pump station is installed, Manifold or valve combination, t- anks, a combination of electrical boxes.
Functional components :
Pump device -- is equipped with motors and pumps, hydraulic station is the source of power. to mechanical energy into hydraulic oil pressure can be.
Manifold -- from hydraulic valve body and channel assembled. Right direction for implementation of hydraulic oil, pressure and flow control.
Valve portfolio -- plate valve is installed in up board after board conn-
ects with the same functional IC.
Tank -- plate welding semi-closed containers, also loaded with oil filtering network, air filters, used oil, oil filters and cooling.
Electrical boxes -- at the two patterns. A set of external fuse terminal plate; distribution of a full range of electrical control.
Hydraulic Station principle : motor driven pump rotation, which pump oil absorption from the oil tank. to mechanical energy into hydraulic pressure to the station, hydraulic oil through Manifold (or valve combinations) realized the direction, pressure, After adjusting flow pipe and external to the cylinder hydraulic machinery or motor oil, so as to control the direction of the motive fluid transformation force the size and speed the pace of promoting the various acting hydraulic machinery.
1.1 A development course
China Hydraulic (including hydraulic, the same below), pneumatic and seals industrial development process can be broadly divided into three phases, namely : 20 early 1950s to the early 1960s, the initial stage; 60's and 70 for specialized production system ;80~90's growth stage for the rapid development stage. Which, hydraulic industry in the early 1950s from the machine tool industry production of fake Su-grinder, broaching machine, copying lathe, and other hydraulic drive started, Hydraulic Components from the plant hydraulic machine shop, self-occupied. After entering the 1960s, the application of hydraulic technology from the machine gradually extended to the agricultural machinery and mechanical engineering fields, attached to the original velocity of hydraulic shop some stand out as pieces of hydraulic professional production. To the late 1960s, early 1970s, with the development of mechanized production, especially in the second automobile factory in providing efficient, automated equipment, along with the Hydraulic Components manufacturing has experienced rapid development of the situation, a group of SMEs have become professional hydraulic parts factory. 1968 China's annual output of hydraulic components have nearly 200,000 in 1973, machine tools, agricultural machinery, mechanical engineering industries, the production of hydraulic parts factory has been the professional development of more than 100 and an annual output more than one million. an independent hydraulic manufacturing industry has begun to take shape. Then, hydraulic pieces of fake products from the Soviet Union for the introduction of the product development and technical design combining the products to the pressure, Hypertension, and the development of the electro-hydraulic servo valves and systems, hydraulic application areas further expanded. Aerodynamic than the start of the industrial hydraulic years later, in 1967 began to establish professional pneumatic components factory, Pneumatic Components only as commodity production and sales. Sealed with rubber and plastics, mechanical seals and sealing flexible graphite sealing industry, the early 1950s from the production ordinary O-rings. rubber and plastics extrusion, such as oil seal sealing and seal asbestos products start to the early 1960s, begun production of mechanical seals and flexible graphite sealing products. 1970s, the burning of the former Ministry, a Ministry, the Ministry of Agricultural Mechanization System, a group of professional production plants have been established, and the official establishment of industries to seal industrial development has laid the foundation for growth.
Since the 1980s, in the country's reform and opening up policy guidelines, with the development of the machinery industry, based mainframe pieces behind the conflicts have become increasingly prominent and attracted the attention of the relevant departments. To this end, the Ministry of the original one in 1982, formed the basis of common pieces of Industry, will be scattered in the original machine tools, agricultural machinery, mechanical engineering industries centralized hydraulic, pneumatic and seals specialized factories, placing them under common management infrastructure pieces Bureau, so that the industry in the planning, investment, technology and scientific research and development in areas such as infrastructure pieces Bureau of guidance and support. Since then entered a phase of rapid development, has introduced more than 60 items of advanced technology from abroad, including more than 40 items of hydraulic, pneumatic 7. After digestion and absorption and transformation, now have mass production, and industry-leading products. In recent years, the industry increased the technological transformation efforts, in 1991, Local enterprises and the self-financing total input of about 20 billion yuan, of which more than 1.6 billion yuan Hydraulic. Through technological transformation and technology research, and a number of major enterprises to further improve the level of technology, technique and equipment to be greatly improved. In order to form a higher starting point, specialization, and run production has laid a good foundation. In recent years, many countries in the development of common ownership guidelines, under different ownership SMEs rapid rise showing great vitality. With the further opening up, three-funded enterprises rapid development of industry standards for improving and expanding exports play an important role. Today, China has and the United States, Japan, Germany and other countries famous manufacturers joint ventures or wholly-owned by foreign manufacturers to establish a piston pump / motor, planetary reduction gears, steering gear, hydraulic control valve, hydraulic system, hydrostatic transmission, hydraulic Casting. pneumatic control valve, cylinder, gas processing triple pieces, mechanical seals, rubber and seal products more than 50 production enterprises, attracting foreign investment over 200 million U.S. dollars.
1.2 the current situation
1.21Basic Profiles
After 40 years of efforts, China hydraulic, pneumatic and sealing industry has formed a relatively complete categories. a certain level of technical capacity and the industrial system. According to the 1995 Third National Industrial Census statistics, hydraulic, Pneumatic seals and industrial 370,000 annual sales income of 100 million yuan in state-owned, village-run, private and cooperative enterprises, individual, "three capital" enterprises with a total of more than 1,300, of which about 700 hydraulic, Pneumatic seals and the approximately 300 thousand. By 1996 with the international trade statistics, the total output value of China's industry hydraulic 2.348 billion yuan, accounting for the world's 6; Pneumatic industry output 419 million yuan, accounting for world No. 10.
1.22 the current supply and demand profiles
Through the introduction of technology, independent development and technological innovation, and high-pressure piston pump, gear pumps, vane pump, General Motors hydraulic valves, tanks, Non-lubricated aerodynamic pieces and various seals of the first large technology products has increased noticeably. stability of the mass production may, for various mainframe products provide a level of assurance. In addition, hydraulic and pneumatic components of the CAD system, pollution control, proportional servo technology has scored some achievements, and is already in production. Currently, hydraulic, pneumatic and seals products total about 3,000 species, more than 23,000 specifications. Among them, there are 1,200 hydraulic varieties, more than 10,000 specifications (including hydraulic products 60 varieties 500 specifications); Pneumatic are 1,350 varieties, more than 8,000 specifications; Rubber seal 350 species more than 5,000 specifications have been basically cater to the different types of mainframe products to the general needs, complete sets of equipment for major varieties of matching rate was over 60%, and started a small amount of exports.
1998 pieces of homemade hydraulic output 4.8 million. sales of about 28 billion (of which about 70% mechanical systems); aerodynamic pieces yield 3.6 million. sales of about 5.5 billion (of which about 60% of mechanical systems); Seals output of about 800 million. sales of about 10 billion (of which about 50% mechanical systems). According to the China Hydraulic Pneumatic Seals Industry Association 1998 annual report, hydraulic product sales rate of 97. 5% (101% for hydraulic), pneumatic 95.9%, 98.7% sealed. This fully reflects the basic marketing convergence.
My hydraulic, pneumatic and sealing industry has attained a great deal of progress, but with mainframe development needs, and the world's advanced level, there are still many gaps, mainly reflected in the product variety, performance and reliability, and so on. Hydraulic products as an example, products abroad only one-third, life for half abroad. In order to meet key mainframe, and mainframe imports of major technology and equipment needs, every year a large number of hydraulic, pneumatic and sealing products imports. According to customs statistics and the analysis of data, in 1998 hydraulic, pneumatic and seals in the import about 200 million U.S. dollars, Hydraulic which about 1.4 billion dollars, aerodynamic nearly 030 million U.S. dollars, sealed about 030 million U.S. dollars. compared with a slight decline in 1997. By sums, currently imported products on the domestic market share of about 30%. 1998 pieces of the domestic market demand for hydraulic total of about six million, the total sales of nearly 40 billion; aerodynamic pieces of the total demand of about 5 million, with sales more than 700 million yuan; Seals total demand of about 1.1 billion. total sales of about 1.3 billion.
1.3 the development trend of the future
1.31 affect the development of the main factors
(1) product development ability, and the level of technological development and speed can not completely meet the advanced mainframe products, major equipment and technology imported equipment and maintenance support;
(2) the number of enterprises manufacturing technology, the level of equipment and management standards are comparatively backward, coupled with a strong sense of quality, resulting in low levels of product performance, quality, Reliability poor services in a timely manner, lack of user satisfaction and trust of the brand-name products;
(3) industry specialization of production low, scattered strength, low repeat serious, between regions and enterprises of convergence products, blindly compete with each other, driving down prices, the decline of enterprise returns, lack of funds, liquidity difficulties, product development and technological transformation is inadequate and seriously restricted the industry to improve the overall level of competition and the increase of strength;
(4) The internationalization of the domestic market and the increasing degree of foreign companies have entered the Chinese market and participate in competition with the domestic private and cooperative enterprises, individuals, foreign-funded enterprises, such as the rise of state-owned enterprises due to the growing impact.
1.32 the development trend
As the socialist market economy continues to deepen, hydraulic, pneumatic and sealing products in the market supply and demand and there is a greater change, long ago to a "shortage" of the seller's market has basically become a "structural surplus" of the characteristics of the buyer's market place . Overall capacity, is already in oversupply situation, in particular the general low level of hydraulic, pneumatic and seals, the general oversupply; and the host of urgent high-tech high-parameter, high value-added high-end products, and they do not satisfy the market needs, only dependent on imports. China joins the WTO, its impact may be even greater. Therefore, the "15" during the growth of the output value of industry, must not depend on volume growth and the industry should address the structural problems of their own, increase the intensity of the adjustment of the industrial structure and product mix, is, we should rely on the improvement of quality, and promote technical upgrading of products to meet market demand and stimulating, seek greater development.
2 The application of hydraulic power sliding stage
2.1 Power sliding Taiwan introduced
This paper deals with the investigation for slide unit's impact and motion stabil?ity in modular machine tool fay means of the method of power bond graph and state space analysis. The dynamic mathematical model of self-adjusting back pressure speed control system used to drive slide unit is established. Main reasons and affect?ing factors for slide unit impact and motion unstability are analysed through compu?ter digital simulation, It is concluded from those that, if the structural dimensions of hydraulic cylinder and back pressure valve are designed rationally, the slide unit's dynamics will markedly be improved.
NOMENCLATURE
Sf flow source
Sei sliding friction force in slide unit
R equivalent viscous friction coefficient in slide unit
Ii mass of slide unit and cylinder
h mass of SABP valve spool
Ci,C2 hydraulic capacitances of rod chamber and non-rod chamber in cylinder re-
spec-tively
C3 spring compliance of SABP valve
R]rR2 hydraulic resistances of damping holes
R9 hydraulic resistance of orifice of SABP valve
Se2 presetting force of spring in SABP valve
I4J5 equivalent liquid inertia in pipe lines
C^Cg equivalent hydraulic capacitances in pipe lines
equivalent hydraulic resistances in pipe lines
V-j V^ oil-containing volumes in non-rod chamber and rod chamber respectively
P,r:, P-i oil pressures in non-rod chamber and rod chamber respectively
F load acted on slide unit
V slide unit velocity
* Department of Mechanical Engineering, Dalian Ur.iversity of Technology, Dalian. China.
2.2 Introduction
During operation of modular machine tool, the changes of slid unit's speed and load acted on it in both magnitude and direction will affect working performar.ee to a different extent Particularly the impact caused by sudden vanishing of load and the motion unstability due to periodical change of load in operation will affect the surface quality of the workpiece machined, and the tool would be broken off under serious conditions, By using the method of power bond graph and state space analy sis, the dynamic mathematical model of the system used to drive slide unit is estab lished, that is called as self-adjusting back pressure speed control system and abbre viated to SABP system. In order to improve slide unit's dynamics, it is necessary to find out the main reasons and affecting factors, that must be based on computer digital simulation and study on the results.
2.3 Dynamic Mathematica Modeld
The schematic diagram of SABP system is shown in Fig.l, the system is used to perform the cycle of feeding, stopping and returning. Four way control valve works in the right position during slide unit's feeding. The supply pressure of the pump is approximately constant under the action of pressure relief valve, the oil through the control valve and pressure compensated flow control valve enters the non-rod chamber to put slide unit forward. At the same time, the oil from the rod chamber is discharged through SABP valve and directional control valve to tank. In this process, the state of two check valves and pressure relief valve is not changed, To establish the mathematical model as reasonably and simply as possible, consid eration must be focused on main affecting factors for a complex non-linear system such as the SABP system. It is illustrated by theoretical analysis and test result ' , that the transient time of the system is much longer than that of the flow control valve, and the flowrate overshoot of the valve in transients affects very small to slide unit speed because of the ;lar
收藏