計算機按鈕注塑模具設計【一模四腔】【說明書+CAD】
計算機按鈕注塑模具設計【一模四腔】【說明書+CAD】,一模四腔,說明書+CAD,計算機按鈕注塑模具設計【一模四腔】【說明書+CAD】,計算機,按鈕,注塑,模具設計,說明書,仿單,cad
摘要
熱塑性塑件的注塑，是注射模中最基本的一種，根據計算機按鈕的造型，分析可得，結構比較簡單，沒有特殊工藝要求，公差等級低，易于實現大批量注塑生產，總體構思過程；首先收集資料，根據塑件結構工藝性、材料收縮率、注射機器的規格、壽命措施、分型面設置、澆口形式、本廠的加工設備和技術、其他相關資料等。其次是模具結構，型腔、型芯配置及結構、冷卻系統、抽芯機構、推出機構、澆道系統、排氣方式、模具材料、模架形式、標準間的選用。
根據PS 的性能，通過查閱機械制造手冊，合理控制塑件的收縮率，確定模具型腔、型芯的設計尺寸及強度計算校核，鎖模力平衡的確定、澆道系統設計、澆道和澆口平衡校核；計算機按鈕結構不需要側抽芯機構，抽芯力的計算；冷卻系統設計；推出機構設計、計算推頂力；排氣方式選用。
關鍵字：計算機按鈕 澆道系統 分型面
Abstract
Thermoplastic injection molding of plastic parts, injection mold is the most basic kind of button in accordance with computer modeling, analysis available, relatively simple structure, there is no special process requirements, a low tolerance level, easy to achieve high-volume injection molding production, the overall idea of the process; First of all, the collection of information technology in accordance with the structure of plastic parts, material shrinkage, injection machine specifications, life measures set up surface, gate the form of factory processing equipment and technology, other relevant information. Followed by the mold structure, cavity, core configuration and structure, cooling system, core-pulling mechanism, the introduction agencies, runner system, the exhaust means, mold materials, mold form of the choice of standard room.
Reasonable control of the contraction rate of plastic parts to determine the mold cavity, the design of core size and strength check calculation, runner and gate balance check; computer side buttons do not need to draw the structure of the core institutions, the calculation of core-pulling power; cooling system design; the introduction of mechanical design, push the top edge computing; exhaust mode selection.
Keywords: plastic parts of the structure of process systems design runner runner system cavity, core
收藏