喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
========================================喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
========================================
沈陽工學院畢業設計說明書
摘 要
此次設計的振動脫水機是利用直線脫水篩來對物料進行脫水的，主要構成部分包括箱體，底座，激振器，彈性支撐，篩網，電動機等，完成了振動脫水機的整體方案設計，并通過動力參數計算確定了零件的大小尺寸，完成了工程圖的繪制，并通過三維建模軟件Solidworks對機器進行建模并虛擬裝配。機器采用兩個反響旋轉的慣性激振器作為激振源，激振力與水平方向的夾角為45°，即機體的振動方向角為45°，通過物料往復運動過程中與篩面的撞擊完成脫水，篩箱由兩部分組成，篩面上面的部分用于承載物料，下面的部分用于排水，上層已脫水物料通過出料口送出，被篩出的水分通過排水管送出。整個箱體結構由熱軋鋼板，角鋼以及無縫鋼管焊接而成，篩面在脫水過程中易出現阻塞現象，需要定期更換。底座部分用于箱體的固定，采用熱軋角鋼，槽鋼焊接而成。彈性支撐部分的彈簧使整個系統區別于無阻尼系統，有著非常重要的作用，通過合理的計算與設計，選取合適的彈簧可以提高脫水的效率。
這種振動脫水機具有性能可靠、結構簡單、能耗少、噪音低、振型穩定、壽命長等優點；從使用、制造、維修等方面都體現出經濟實用性。
關鍵詞：振動脫水機；慣性式激振器；直線振動篩
ABSTRACT
The design of the vibration of the machine is using linear sieve dehydration to dehydrate the materials, Main components including body, base, vibrator, elastic support, screen, motor, etc.,I completed the vibration dryer overall scheme design, And through the dynamic parameters, calculate to determine the size of the parts size, completed the project figure drawing, and through the three dimensional modeling software Solidworks modeling and virtual assembly on the machine. Machine adopts two resonance rotational inertia vibrator as excitation source, Exciting force and the horizontal Angle of 45 °, namely the body of the vibrating direction Angle is 45 °, through the material in the process of the reciprocating motion with the impact of screen complete dehydration, screen box is composed of two parts, the screen surface parts used in bearing material, the following sections for drainage, the upper has been dehydrated material sent through the discharging port, be screen out of the water through a drain. The whole body structure by the hot rolled steel plate, Angle steel and seamless steel tube welding to form, sieving liable to occur in the dehydration process blocking phenomenon, need to be replaced regularly. Fixed base part for enclosure, usinghot rolling Angle steel,channel steelwelded together. Elastic support part of the spring different from system without damping, it's a very important role for the whole system, through the reasonable calculation and design, select the appropriate spring can improve the efficiency of dehydration.This kind of vibrating dewatering machine is provided with reliable performance, simple structure, less energy consumption, low noise, stable vibration mode, the advantages of long service life; From the use, manufacture, maintenance reflects in such aspects as economic practicality.
Keywords:dewatering machine；vibration inertia vibrator；linear vibrating screen
III
沈陽工學院畢業設計說明書
目錄
摘 要 I
ABSTRACT II
1課題的提出與發展 1
1.1 課題的提出和意義 1
1.2 篩分機械的分類與用途 1
1.2.3 篩分機械的用途 4
1.3 篩分技術和振動篩分機械的發展 5
1.3.1篩分技術及其發展方向 5
1.3.2國內外振動篩分機械的發展 5
1.4課題研究的主要內容和理論基礎及應用工具 7
2設計方案的確定 8
2.1工作原理及總體方案的提出 8
2.1.1工作原理 8
2.1.2總體方案 9
2.2激振器的選擇 9
2.3箱體結構設計 10
2.4電機的布置 11
2.5傳動方式 13
2.6彈性元件的選擇 14
3動力學分析及運動學計算 15
3.1動力學分析 15
3.2設計原始材料 17
3.3激振器的計算 17
3.4電機的選擇 21
4強度校核 23
4.1軸的強度校核 23
4.2軸承校核 30
4.3鍵的強度計算 31
結論 33
致謝 34
參考文獻 35
5