喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
==========================================喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
==========================================
Suspension Basics
Kaoru Aoki, Shigetaka Kuroda, Shigemasa Kajiwara,
Hiromitsu Sato and Yoshio Yamamoto
Honda R&D Co.,Ltd.
Abstract
The method of independem suspension design is studied in detail andthe relation among suspension movement，front wheel alignment parametersand tyre wear is analysed in this paper．
Firstly,the big indpendent designmethods of main components of double-linksindependent suspension，including shock absorber’choosing，antiroU bar’scalculation，torque bar spring’s design，are presented and movement ofdouble—links indpendent suspension is analysed．So a soRware which isused to design optimal and analyse independent suspen-
sion is programmed．Meanwhile，me experiment to Verifythe result is made with the equipment ofthe front wheel alignment．
Then an optimal design t0 mjnimize tyre、vear is perfonlled，whichbrings forward me way to reduce tyre wear throu optimal choosing andmodulating origina ldenpention cture of double-1ink independent suspension andoptimizjng the cut point of track rodill。Future more，the memod oformogonal experiment is used to analyse t11e effect that tlle-stn cture a11d fixparameters of double-1ink indendent suspension have on me suspension performance and tyre wear.And the most impotent factor and second important factor confiemed.
KEY WoRDS: automobile，independent suspension，tyre wear， alignment paraeter
The suspension system, while not absolutely essential to the operation of a motor vehicle, makes a big difference in the amount of pleasure experienced while driving. Essentially, it acts as a "bridge" between the occupants of the vehicle and the road they ride on The term suspension refers to the ability of this bridge to "suspend" a vehicle's frame, body and powertrain above the wheels. Like the Golden Gate Bridge hovering over San Francisco Bay, it separates the two and keeps them apart. To remove this suspension would be like taking a cool dive from the Golden Gate: you might survive the fall, but the impact would leave you sore for weeks.
Think of a skateboard. It has direct contact with the road. You feel every brick, crack, crevice and bump. It's almost a visceral experience. As the wheels growl across the paveme
nt, picking up a bump here, a crack there, the vibration travels up your legs and settles in your gut. You could almost admit you were having fun, if you didn't feel like you were gonna toss your tacos at any second.This is what your car would feel like without a suspension system.Before we get into the individual components that make up a vehicle's ride support, let's take a look at a basic principle of design: solid axle vs. independent suspension.
Solid axle suspension (also known as rigid beam, or rigid axle) is the most elementary form of connecting the upper and lower halves of a vehicle. As the name implies, it utilizes a single piece of metal -- a common axle for both wheels -- sprung beneath the car's undercarriage. Pivots located between the axle and the wheel spindles allow the wheels to swivel on each end.
In solid axle suspension, because both wheels share the same axle, the up or down movement of one wheel causes a like movement in the other wheel. They respond as one unit. As you can imagine, this doesn't make for the most comfortable ride. Even though solid axle designs utilize springs to soften their inherently harsh ride characteristics (more on different spring setups below), they still bump along like a brick outhouse. So why use them at all? Well, strength, for one. Because of the unitized construction, solid axle suspension systems offer incredible load bearing capacity. They also handle uneven roads superbly. You'll find them in trucks and offroad vehicles[1].
A modified form of the solid axle design is called Twin-I-beam suspension, or semi-rigid axle. In this setup, two rigid axles -- one for each wheel -- take the place of a single axle. This design offers many of the strengths of the solid axle design, with a slightly softer ride. You'll find it used primarily in the front end of light trucks.
The other main design is called independent suspension. As the name suggests, independent suspension assemblies offer a separate "bridge" for each wheel. They deliver the best ride characteristics by far, and are found most frequently in passenger cars, minivans, and other street vehicles. This is the most popular kind of suspension system in use today. If you like the "smoothness" of your car's ride, we can almost guarantee it has independent suspension. In addition to axles, wheels and tires, today's suspension systems utilize two other components that are critical to safe and comfortable driving: springs and shock absorbers.
Springs
A car's springs are the central part of the suspension. There are different designs of springs, such as torsion bars and leaf springs, but nearly all of today's passenger cars use coil springs at all four corners. A lot of trucks use coil springs too, with leaf springs for heavier load capacity typically found on a truck's rear suspension system. Springs absorb and store road shock caused by bumps, dips, cracks, and so forth (remember the skateboard analogy). They absorb this shock by either compressing or extending. When a car's wheel goes over a bump and gets pushed upward, the spring absorbs that additional load, keeps the road shock from reaching the chassis, and makes sure the tire maintains contact with the pavement[3].
ng compresses or extends is determined by its "spring rate." Spring rate is measured in pounds per inch of deflection; for example, 100 pounds per inch. So, say a load of 200 pounds is applied, the spring will deflect 2 inches. Spring rate comes from various factors. For a coil spring, this includes the number of active coils, the diameter of the coils, and the diameter of the spring wire. The fewer coils a spring has, the higher the spring rate it will have. The design of a spring affects how well the vehicle will ride and handle. A spring that absorbs lots of energy will generally offer a comfortable ride. After all, it can absorb most of the road shock (energy) that is being generated by the road surface. But there are always engineering trade-offs. This kind of spring generally requires a higher vehicle ride height, which will cause the vehicle to feel unstable during cornering. This instability is because the more distance a spring compresses or extends, the more the vehicle "rolls" around on its suspension. This rolling is called weight transfer, and it is caused by centrifugal force acting on the weight of the vehicle as it goes around a corner. Weight transfer can overload a tire's grip, which ultimately hurts traction, and therefore handling[1].
Shock Absorbers
The other main part of a car's suspension is the shock absorber. Contrary to its name, a shock absorber plays a minimal role in absorbing impacts taken by the suspension. That's the spring's job. A shock absorber dampens road impacts by converting the up and down oscillations of the spring into thermal energy.
Shock absorbers work in two cycles -- the compression cycle and the extension cycle. The compression cycle occurs as the piston moves downward, compressing the hydraulic fluid in the chamber below the piston. The extension cycle occurs as the piston moves toward the top of the pressure tube, compressing the fluid in the chamber above the piston. A typical car or light truck will have more resistance during its extension cycle than its compression cycle. With that in mind, the compression cycle controls the motion of the vehicle's unsprung weight, while extension controls the heavier, sprung weight[2].
People who live and breathe shock absorbers don't like the term shock absorbers; they prefer "dampers." The unwashed masses -- that's you and me -- just call them shock absorbers.
Without a shock absorber, a spring that has absorbed energy will release it by oscillating at an uncontrolled rate. The spring's inertia causes it to bounce and overextend itself. Then it recompresses, but again travels too far. The spring continues to bounce at its natural frequency until all the energy originally put into the spring is used up by friction. This effect can be quite detrimental to the stability of a vehicle[3].
Confused? OK, here's an analogy. If you have a Slinky lying around -- and who doesn't these days? -- you can use it as an example[2]. Hold up a compressed Slinky in the air with your hand. Now hold just one end and let the other drop. The Slinky will absorb the potential energy caused by gravity (just like how a car's spring absorbs road shock) and then bounce up and down, up and down (aka: oscillate), for a long time. This what an automotive spring does if it doesn't have a shock absorber attached to it.
Perhaps you've heard the word "strut," or, more formally, MacPherson strut. Struts are simply shock absorbers used as major structural members. For struts, the shock absorber is placed inside the coil spring. In addition to saving space, it often costs less. Many cars use a strut design.Shocks and struts help control how fast the suspension is allowed to move, which is important for keeping the tires in contact with the road. Most shock absorber designs have more resistance during the extension (rebound) cycle than the compression cycle[6]. This is because the extension cycle controls the motion of the vehicle's sprung weight (half of the suspension and everything else above the suspension) [4]. The compression cycle, on the other hand, controls the motion of unsprung weight (wheels, tires, brakes, and half of the suspension). Obviously, there is a lot more weight in the upper part of the car than unsprung weight in the lower part of the car. All modern shock absorbers are velocity-sensitive -- the faster the suspension moves, the more resistance the shock absorber provides. This enables shocks to adjust to road conditions and to control all of the unwanted motions that can occur in a moving vehicle, including bounce, sway, brake dive and acceleration squat.
Anti-sway Bars
Anti-sway bars (also known as anti-roll bars) are used along with shock absorbers or struts to give a moving automobile additional stability. An anti-sway bar is a metal rod that spans the entire axle and effectively joins each side of the suspension together. When the suspension at one wheel moves up and down, the anti-sway bar transfers movement to the other wheel. This creates a more level ride and reduces vehicle sway[5]. In particular, it combats the roll of a car on its suspension as it corners. For this reason, almost all cars today are fitted with anti-sway bars as standard equipment, although if they're not, kits make it easy to install the bars at any time.
So there you have it -- the basics of automotive suspension. We realize this is a simplistic view of a complex system.
The Future of Car Suspensions ，While there have been enhancements and improvements to both springs and shock absorbers, the basic design of car suspensions has not undergone a significant evolution over the years. But all of that's about to change with the introduction of a brand-new suspension design conceived by Bose -- the same Bose known for its innovations in acoustic technologies. Some experts are going so far as to say that the Bose suspension is the biggest advance in automobile suspensions since the introduction of an all-independent design.[3]
How does it work? The Bose system uses a linear electromagnetic motor (LEM) at each wheel in lieu of a conventional shock-and-spring setup. Amplifiers provide electricity to the motors in such a way that their power is regenerated with each compression of the system. The main benefit of the motors is that they are not limited by the inertia inherent in conventional fluid-based dampers. As a result, an LEM can extend and compress at a much greater speed, virtually eliminating all vibrations in the passenger cabin. The wheel's motion can be so finely controlled that the body of the car remains level regardless of what's happening at the wheel. The LEM can also counteract the body motion of the car while accelerating, braking and cornering, giving the driver a greater sense of control. Unfortunately, this paradigm-shifting suspension won't be available until 2009, when it will be offered on one or more high-end luxury cars. Until then, drivers will have to rely on the tried-and-true suspension methods that have smoothed out bumpy rides for centuries[4].
If you learn more , you'll get a little more technical and a little more specific, looking at particular spring and suspension setups, and the advantages and disadvantages of each. until then, keep your eye on the road, and watch out for those pothole,then you will learn more good knowledge .In the fact ,there are many thing can be learn in our life ,the only thing what you should do is observation.
REFERENCES
[1]Aoki, Kaoru, et al.: "Development an Integrated Motor Assist Hybrid System", JSAE No. 98-99 161
[2]Yamaguchi, Tetsuro: "CVT Control in the HONDA Hybrid 'IMA'", No. 9908 JSAE SYMPOSIUM, Latest Motive Power Transmission Technologies '99, p.3740
[3]Ohno, Hiroshi, et al.: "Development of a NOx Adsorptive Reaction Type Three-Way Catalyst", HONDA R&D Technical Review, Vol. 11 No. 2 (October 1999), p.45-50
[4]Fukuo, Koichi, et al.: "Development of the Ultra Low Fuel Consumption Hybrid Car 'Insight'", HONDA R&D Technical Review, Vol. 11 No. 2 (October 1999), p.1-8
[5]Hideki Tanaka, et al .: "The Effect of 0W-20 Low Viscosity Engine Oil on Fuel Economy”, SAE Paper No.1999-01-3468,Fuels and Lubricants meeting and Exposition, Toronto, Ontario, Canada, October 1999.
[6]Aoki, Kaoru, et al.: "An Integrated Motor Assist Hybrid System", SAE Paper No.2000-01-2059, Government / Industry Meeting, Washington, D.C., USA