喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，==================================
【QQ：3278627871 可咨詢交流】
喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，==================================
【QQ：3278627871 可咨詢交流】
喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，==================================
【QQ：3278627871 可咨詢交流】
徐州工程學院畢業設計(論文)
摘要
人類正面臨著石油和煤炭等礦物燃料枯竭的嚴重威脅，太陽能作為一種新型能源具有儲量無限、普遍存在、利用清潔、使用經濟等優點，但是太陽能又存在著低密度、間歇性、空間分布不斷變化的缺點，這就使目前的一系列太陽能設備對太陽能的利用率不高。太陽光線自動跟蹤裝置解決了太陽能利用率不高的問題。本文對太陽能跟蹤系統進行了機械設計和自動跟蹤系統控制部分設計。
第一，機械部分設計：
機械結構主要包括底座、主軸、齒輪和齒圈等。當太陽光線發生偏離時，控制部分發出控制信號驅動步進電機1帶動小齒輪1轉動，小齒輪帶動大齒輪和主軸轉動，實現水平方向跟蹤；同時控制信號驅動步進電機2帶動小齒輪2，小齒輪2帶動齒圈和太陽能板實現垂直方向轉動，通過步進電機1、步進電機2的共同工作實現對太陽的跟蹤。
第二，控制部分設計：
主要包括傳感器部分、信號轉換電路、單片機系統和電機驅動電路等。系統采用光電檢測追蹤模式實現對太陽的跟蹤。傳感器采用光敏電阻，將兩個完全相同的光敏電阻分別放置于一塊電池板東西方向邊沿處下方。當兩個光敏電阻接收到的光強度不相同時，通過運放比較電路將信號送給單片機，驅動步進電機正反轉，實現電池板對太陽的跟蹤。
關鍵詞 太陽能；跟蹤；光敏電阻；單片機；步進電機
Abstract
Human being is seriously threatened by exhausting mineral fuel, such as coal and fossil oil. As a kind of new type of energy sources, solar energy has the advantages of unlimited reserves, existing everywhere,using clean and economical .But it also has disadvantages ,such as low density,intermission,change of space distributing and so on. These make that the current series of solar energy equipment for the utilization of solar energy is not high. In order to keep the energy exchange part to plumb up the solar beam,it must track the movement of solar. In this paper, the solar tracking system of the mechanical part and control system part are designed.
First, the mechanical part is designed.
Mechanical structure mainly includes the main spindle, stepping motors, gears and gear ring, and so on. When the sun's rays has a deviation, small gear are rotated by stepper motor according to the control signal from MCU. And the large gear and main spindle is rotated by small gear in order to track to achieve the level direction. At the same time, another small gear is rotated by another stepper motor according to the control signal.And the large gear and the solar panels are rotated by the small gear in order to track to achieve the vertical direction. Solar is tracked by the two stepper motors together.
Second, control system part is designed.
Control system mainly includes the sensors part, stepper motor, MCU system and the corresponding external circuit, and so on. Photoelectric detection system is used to track solar. Sensors use photosensitive resistance. The two same photosensitive resistances were placed in east and west direction of the bottom edge .When the two photosensitive resistances received different light at the same time, the signal from comparison circuit is sent to MCU in order to rotate stepping motors.
Keywords Solar energy Tracking Photosensitive resistance SCM Stepping motor
II
徐州工程學院畢業設計(論文)
目 錄
1緒論 1
1.1課題來源 1
1.2課題背景 1
1.2.1能源現狀及發展 1
1.2.2我國太陽能資源 1
1.2.3目前太陽能的開發和利用 2
1.2.4太陽能的特點 2
1.3課題研究的目的 2
1.4研究課題的意義 2
1.4.1新環保能源 2
1.4.2提高太陽能的利用率 3
1.5太陽能利用的國內外發展現狀 3
1.6太陽追蹤系統的國內外研究現狀 4
1.7論文的研究?jī)?nèi)容 5
1.8論文結構 5
2太陽能自動跟蹤系統總體設計 6
2.1太陽運行的規律 6
2.2跟蹤器機械執行部分比較選擇 6
2.2.1立柱轉動式跟蹤器 6
2.2.2陀螺儀式跟蹤器 7
2.2.3齒圈轉動式跟蹤器 7
2.2.4本課題的機械設計方案 8
2.3跟蹤方案的比較選擇 8
2.3.1視日運動軌跡跟蹤 9
2.3.2光電跟蹤 9
2.3.3視日運動軌跡跟蹤和光電跟蹤相結合 11
2.3.4本設計的跟蹤方案 12
3機械設計部分 13
3.1太陽能自動跟蹤系統機械設計方案 13
3.2第一齒輪轉動計算 13
3.2.1材料選擇 13
3.2.2尺寸計算 13
3.2.3校核計算 14
3.2.4齒根彎曲疲勞強度驗算 15
3.3第二齒輪轉動計算 17
3.3.1材料選擇 17
3.3.2尺寸計算 17
3.3.3校核計算 17
3.3.4齒根彎曲疲勞強度驗算 19
3.4軸瓦校核計算 20
3.4.1大軸瓦校核計算 20
3.4.2小軸瓦校核計算 22
3.5鍵聯接計算 25
3.5.1主軸與大齒輪的鍵聯接 25
3.5.2小軸與齒圈的鍵聯接 25
3.5.3步進電機1輸出軸與小齒輪1的聯接 25
3.5.4步進電機2輸出軸與小齒輪2的聯接 25
3.6抗風性分析 26
3.6.1底座上螺釘校核 26
3.6.2軸校核 26
4自動跟蹤系統設計 28
4.1系統總體結構 28
4.2光電轉換器 28
4.2.1光電轉換電路 28
4.3單片機及其外圍電路 29
4.3.1 AT89C51單片機 29
4.3.2外圍電路 31
4.4步進電動機及驅動電路 32
4.4.1步進電動機介紹 32
4.4.2步進電機的主要特性 32
4.4.3步進電機的選擇 33
4.4.4驅動電路 34
4.5系統的實現 35
4.5.1光敏電阻光強比較法 35
4.5.2光敏電阻光強比較法的工作過程 36
4.5.3系統的流程圖 37
5結論 39
5.1結論 39
5.2展望 39
致謝 40
參考文獻 41
附錄1 43
附錄2 51
3