喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，原稿可自行編輯修改=====================喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，原稿可自行編輯修改=====================喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，原稿可自行編輯修改=====================
摘 要
行走機構是采煤機的移動推行機構，其一旦出現問題將導致整個采煤機停止運行，嚴重影響采煤機的正常生產。本論文簡單地闡述了2×132/630-WD行走箱的設計。
采煤機行走箱是牽引部的一部分，擔負著移動采煤機的作用。采煤機既受井下工作面狹小空間的約束又要適應惡劣的工作條件，所以行走箱要求要尺寸盡量小，又要必須滿足承載工況的強度要求。本設計主要內容包括傳動比分配、齒輪設計校核、花鍵和軸的設計校核，最后從力學方面對行走輪和銷齒嚙合進行了彎曲強度和接觸強度的有限元分析，并對行走機構核心部件之一的導向滑靴在各種工作狀況下的受力情況進行了探索性的分析。
通過以上分析計算，設計出采煤機行走箱的整體結構，了解了行走機構非正常損壞、失效的一些原因和規律，為以后的產品設計和優化奠定了一定的基礎。
關鍵詞：采煤機 ；行走機構 ；彎曲強度 ；銷軌
ABSTRACT
Haulage mechanism of shearer is the executive device for the machine’s shift. And as soon as it fails to operate, shearer will stop working, which definitely affects regular production and operation of shearer. So this paper studies some preliminary causes for improper failure and damage of the haulage mechanism. The paper bridfly expounds in the design of the department of walking box of 2×132/630-WD Shearer．
The running box is apart of traction of shearer, which is used for moving the shearer. The Shearer not only is limited to narrow space by underground mining, but also has to adapt to bad working conditions．Therefore, the size of the walking box should be as small as possible, and it must meet the required strength bearing conditions. The main contents are distributing the drive ratio and the designing and checking of gears, spline and shaft. The last part of this paper is about force analysis of the engagement between sprocket and pin-rail, which mainly studies bending strength and contact strength by the method of FEA. Finally, guiding shoes of shearer, which are the key parts of its haulage mechanism, are simply analyzed for their force analysis under different working conditions.
By the overall study, the box of shearer’s overall structure is worked out, some preliminary causes for the improper failure and damage of haulage mechanism are given, which will provide useful reference for further design and optimization.
Keywords：Shearer ；haulage mechanism ；bending strength ；pin-rail