喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有，所見即所得，CAD圖紙均為高清圖可自行編輯，文檔WORD都可以自己編輯的哦，有疑問咨詢QQ:1064457796,,,課題后的【XX系列】為整理分類用，與內容無關，請忽視
畢業設計（論文）翻譯資料
（外文及中文）
專 業： 指導教師：
學生姓名： 班級-學號：
年 月
SLP ANALYSIS
Lan Xiuju
(Institute of Industrial Engineering, Zhejiang University of Technology)
Abstract: This paper uses the method of SLP to systematically analyze one enterprise's existing facility layout situation and presents an optimization scheme to reach the goal of reducing logistics cost.
Key words: SLP; Value Engineering; Optimization layout; Logistics
1 Introduction
Because of the fierce compel situation enterprises are facing, how to reduce cost effectively, quicken technology improvement, strengthen the ability of competition.
2 The Method of SLP and Production Logistics Optimization
Facility layout, on the basis of the functions the system should fulfill is to systematically design all facilities, personnel and investment in the system. Its key content 15 the design of the factory, shops, and facilities and so on. Its goal is to make the logistics route rational, that is, to enhance the whole production system's profit by changing or modulating the production logistics.
2.1 The logistics analysis of the metalworking shop
Metalworking shop is the processing center of this enterprise. Processing techniques are various with the different types of parts. There are 34 types of parts need to be processed perennial. The first step of design is the detailed analysis of processing techniques of the parts. Take the back moulding board for example (showed in Table l).
2.2 Draw location interrelated figure of all work units
In metalworking shop, the transfer of the size of the logistics amount is the most important thing to consider, that is, effects of other things can be ignored，So we make propinquity table (Table 6) only according to the work units' logistics interrelated table(Table 5), without taking the non-logistics Interrelated table into account.
3 Conclusions
So for the manufacturing, during the complex pressing process, the first step to reduce the product cost is to optimize facilities layout pattern inside the enterprise. SLP is undoubted an effective method to solve this problem.
Acknowledgments
The author express sincere thanks to the National Natural Science Foundation of Zhejiang Province for the financial support under the grant number No.Y604305.
References
[1] Lan Xiuju，Wang Yaliang. SLP Analysis on Manufacturing Enterprise's Facility Layout[J]. Zhejiang University of Technology press，2007（06）
布置設計分析
蘭秀菊
（浙江工業大學，工業工程專業）
摘要：本文運用系統布置分析方法系統地分析一個制造企業生產設施布置現狀并且提出一個最佳化方案來達到削減物流成本的目標。并且這個最佳化方案是非?？尚械?。
關鍵詞：系統布置設計；價值工程；優化布置；物流
1 引言
面對現在的制造業激烈競爭現狀，怎樣去有效地削減成本，加快技術改進，增強競爭能力，縮短生產周期，改進生產和服務質量成為當前制造業須處理的問題。
2 系統布置設計方法和生產物流優化
設施布置，系統的基本功能必須實現，也要對系統中的設備、人員、投資等進行系統的設計。它的核心內容是對工廠、車間、設備布局等等資源的設計。它的目標就是使物流路線合理化，因此，通過改變或調制生產物流來提高整個生產系統的利潤。
2.1 金工車間的物流分析
加工工藝分析。加工車間是制造企業的處理中心。不同類型部分加工工藝是很多的。有34個部分需要長期處理。設計的第一步就是對零件的加工工藝進行詳細分析。取后模板加工工藝為（表1）。
2.2 繪制作業單位位置相關圖
在金工車間，物流轉移量被認為是最重要的事情，不需要考慮其他方面的影響，所以我們不考慮非物流相關表（表6）僅僅記錄作業單位綜合相互關系圖（表5），沒有對非物流強度進行記錄。
3 結論
所以對于加工制造，在復雜的生產過程中，降低生產成本的第一步是得到在制造車間的設施布局最優化方案。解決這個問題，系統設施設計無可厚非是一個有效的方法。
致謝
真誠地感謝浙江省國家自然科學基金會準許的對專利604305的財政支持。
參考文獻
[1] 蘭秀菊，王亞亮，沈苗苗.車間設施優化布置方案.浙江大學學報，2007（06）
6