喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有，，圖紙均為高清圖，，CAD圖紙可自行編輯，，有疑問咨詢QQ:1064457796
型彎板沖壓成形工藝及模具設計
摘 要：本設計題目為復合模具設計，體現了典型復合模具設計的要求、內容與方向。通過工藝分析以及工藝方案的確定，明確了模具設計的方向；通過對毛坯尺寸的確定，沖裁力以及壓力中心的計算，初選了壓力機；并根據模具的總體結構設計思想，對各個零部件進行了標準化設計。
所選的沖裁模具為典型的沖孔落料正裝復合模，采用后導柱模架，前后送料的方式，用導正銷和擋料銷定位，并采用剛性打料裝置和彈性卸料裝置。這種模具結構適用于沖裁較硬或厚度大于0.3mm的板料。
關鍵詞:復合模，凸模，凹模，凸凹模，彎曲模
Sheet forming and die design
Abstract：This design topic designs for The piercing die design of the dunnage backup plate, body now typical model The piercing die design of request, contents and direction.pass the craft analysis, the craft project really settles, making sure the direction of The piercing die design, really settling to the blank product size, computing to the blanking pressure, compute the pressure center, choose the tonnage of the pressure machine and the pressure machine.
The die is a character of compound die is theg interted position of the blanking punch and blanking die.Use the guide pin and guide pin bushing.The die use guide pins and stop pins.and spring stripper,knockout rod.The die is used to blank the plate whose stiff is greate or thickness is bigger than 0.3mm
Keywords: The piercing die，punch，cavitydie，punch-die，bending die
II