0522-半自動鉆床設計及運動學分析【全套CAD圖+PROE模型+仿真視頻】

0522-半自動鉆床設計及運動學分析【全套CAD圖+PROE模型+仿真視頻】,全套CAD圖+PROE模型+仿真視頻,半自動,鉆床,設計,運動學,分析,全套,cad,proe,模型,仿真,視頻 摘要 隨著先進制造技術的發展和進步，半自動化加工已成為機加工過程中的一種主流技術。這一技術的運用提高了機加工過程中工作效率和加工精度。半自動化多工位鉆床就是提高鉆削加工精度和效率的一種很好的機加工工具。本文對半自動化多工位鉆床進行了設計，采用了普通車床設計的步驟和方法，綜合考慮半自動化機床的特點。從切削力入手確定主軸及電機，到整個機床的結構設計和機床的控制。最后到對機床初始化程序設計。 本文所做的工作: 1.完成半自動化多工位鉆床的資料收集與國、內外現狀的調查比較，提出較為可行的方案; 2.完成機床的機械結構設計計算與電氣控制系統設計，初步完成控制系統的軟硬件設計；提交論文及機械系統的裝配與關鍵零部件的相應圖紙及半自動化系統的硬件圖，同時提交電子文檔; 3.編寫設計計算說明書。 完成了一臺經濟型的半自動化機床的設計。 關鍵詞：半自動化技術、鉆床、鉆削、計算機控制、單片機 Abstract With the manufacturing development, numerical control manufacturing has become one of the major advanced technologies. efficiency and accuracy has been improved in application of the technology. Numerical control auto-drilling machine is a kind of the new machine tools that can improve the machining accuracy and efficiency. The paner has designed for Numerical control auto-drilling machine, using design method of the ordinary lathe, and considering the characteristic of the numerical control machine tools synthetically. cutting force has been calculated, the structural and the control system has been designed. Finally, the software routine has been explored. This paner has finished major works: 1. Completed a investigation of internal and external of current situation for numerical control multistage-drilling machine, and compared it, put forward a feasible scheme; 2. Completed the mechanical structural design an calculated and designed the electric control system, and finished the software and hardware of the control system tentatively; Submit thesis and the assembly of mechanical system and hardware picture of key spare part and drawing of numerical control system, submit the electronic file at the same time; 3. Write the specification of designing and calculating, has designed an economy numerical control machine tool. Keywords： numerical control machining、drilling machine、drilling、computer control、single chip computer 2