基于FPGAverilog數字鐘源碼(共6頁)

《基于FPGAverilog數字鐘源碼(共6頁)》由會員分享，可在線閱讀，更多相關《基于FPGAverilog數字鐘源碼(共6頁)（6頁珍藏版）》請?jiān)谘b配圖網上搜索。

1、精選優質文檔-傾情為你奉上module Dig_clk(input CLK_50M, input CLK_1HZ,input CLK_1K,input RSTN,input selec,input SET_add,/input SET_sub,output 23:0time_value,output 3:0LED);wire CLK_1S;wire 7:0hour,min,sec;assign LED = mode;wire 3:0mode;set_time D1(.RSTN(RSTN),.TURN(selec),.flag(mode);wire value0,value1,value2;mo

2、de_sel D2(.set_add(SET_add),.CLK(CLK_1HZ),.mode(mode2),.value(value2);wire CLK_min,CLK_h;sec_bit D3(.CLK_1S(value2),.RSTN(RSTN),.sec(sec),.CLK_min(CLK_min);mode_sel D4(.set_add(SET_add),.CLK(CLK_min),.mode(mode1),.value(value1);min_bit D5(.CLK_min(value1),.RSTN(RSTN),.min(min),.CLK_h(CLK_h);mode_sel

3、 D6(.set_add(SET_add),.CLK(CLK_h),.mode(mode0),.value(value0);hour_bit D7(.CLK_h(value0),.RSTN(RSTN),.hour(hour),);assign time_value = hour*10000+min*100+sec;endmodulemodule set_time ( input RSTN, input TURN, output reg3:0flag );always(posedge TURN or negedge RSTN)beginif(RSTN)flag = 4b1000;else fla

4、g = flag2:0,flag3;endendmodulemodule mode_sel(input CLK,input set_add,input mode,output value);assign value = (mode)?set_add:CLK;endmodulemodule sec_bit(input CLK_1S,input RSTN,output reg7:0sec,output reg CLK_min);always(posedge CLK_1S or negedge RSTN)beginif(!RSTN) sec = 0;else if(sec = 8d59)begin

5、sec = 0; CLK_min = 1; endelse beginsec = sec + 1;CLK_min = 0;endendendmodulemodule min_bit(input CLK_min,input RSTN,output reg7:0min,output reg CLK_h);always(posedge CLK_min or negedge RSTN)beginif(!RSTN) min = 0;else if(min = 8d59 )beginmin = 0;CLK_h = 1;endelse beginmin = min + 1;CLK_h = 0;endende

6、ndmodulemodule hour_bit(input CLK_h,input RSTN,output reg7:0hour);always(posedge CLK_h or negedge RSTN)beginif(!RSTN) hour = 0;else if(hour =8d23) hour = 0;else hour = hour + 1;endendmodulemodule lab4_top(input CLK_50M,input RSTN,/input mode,/input 23:0num_out,output wire2:0sel_out,output wire7:0seg

7、,output 3:0LED,input TURN,input SET_add/input SET_sub);wire CLK_1HZ;wire CLK_1KHZ;wire 23:0num_out;/wire 3:0data_num;wire 23:0time_value;wire 23:0num_value;sys_clk U1(.CLK(CLK_50M),.RSTN(RSTN),.CLK_1K(CLK_1KHZ),.CLK_1HZ(CLK_1HZ);seg_Display U2(.CLK_1K(CLK_1KHZ),.RSTN(RSTN),.num_value(time_value),.se

8、l(sel_out),.seg(seg);wire turn, set_add;key_esk #(2)U3(.CLK_1K(CLK_1KHZ),.key_in(TURN,SET_add),.key_out(turn,set_add);Dig_clk U6(.CLK_50M(CLK_50M),.CLK_1HZ(CLK_1HZ),.CLK_1K(CLK_1KHZ),.RSTN(RSTN),.selec(turn),.SET_add(set_add),/.SET_sub(SET_sub),.time_value(time_value),.LED(LED);Endmodulemodule key_esk(input CLK_1K,input width-1:0key_in,output width-1:0key_out);parameter width = 3;reg width:0key1,key2,key3;assign key_out = (key1|key2|key3);always(posedge CLK_1K)beginkey1 = key_in;key2 = key1;key3 = key2; endendmodule專心-專注-專業