沖壓工藝 外文及翻譯

《沖壓工藝 外文及翻譯》由會員分享，可在線閱讀，更多相關《沖壓工藝 外文及翻譯（21頁珍藏版）》請?jiān)谘b配圖網上搜索。

1、12.外文翻譯1. The mold designing and manufacturingThe mold is the manufacturing industry important craft foundation, in our country, the mold manufacture belongs to the special purpose equipment manufacturing industry. China although very already starts to make the mold and the use mold, but long-term h

2、as not formed the industry. Straight stabs 0 centuries 80s later periods, the Chinese mold industry only then drives into the development speedway. Recent years, not only the state-owned mold enterprise had the very big development, the three investments enterprise, the villages and towns (individua

3、l) the mold enterprises development also rapid quietly.Although the Chinese mold industrial development rapid, but compares with the demand, obviously falls short of demand, its main gap concentrates precisely to, large-scale, is complex, the long life mold domain. As a result of in aspect and so on

4、 mold precision, life, manufacture cycle and productivity, China and the international average horizontal and the developed country still had a bigger disparity, therefore, needed massively to import the mold every year .The Chinese mold industry must continue to sharpen the productivity, from now o

5、n will have emphatically to the profession internal structure adjustment and the state-of-art enhancement. The structure adjustment aspect, mainly is the enterprise structure to the specialized adjustment, the product structure to center the upscale mold development, to the import and export structu

6、re improvement, center the upscale automobile cover mold forming analysis and the structure improvement, the multi-purpose compound mold and the compound processing and the laser technology in the mold design manufacture application, the high-speed cutting, the super finishing and polished the techn

7、ology, the information direction develops .The recent years, the mold profession structure adjustment and the organizational reform step enlarges, mainly displayed in, large-scale, precise, was complex, the long life, center the upscale mold and the mold standard letter development speed is higher t

8、han the common mold product; The plastic mold and the compression casting mold proportion increases; Specialized mold factory quantity and its productivity increase; The three investments and the private enterprise develops rapidly; The joint stock system transformation step speeds up and so on. Dis

9、tributes from the area looked, take Zhejiang Delta and Yangtze River delta as central southeast coastal area development quickly to mid-west area, south development quickly to north. At present develops quickest, the mold produces the most centralized province is Guangdong and Zhejiang, places such

10、as Jiangsu, Shanghai, Anhui and Shandong also has a bigger development in recent years.1.模具設計與制造 模具是制造業的重要工藝基礎，在我國模具制造屬于專用設備制造業。中國雖然很早就開始制造模具和使用模具，但長期未形成產業。直到20世紀80年代后期，中國模具工業才駛?cè)氚l(fā)展的快車道。近年，不僅國有模具企業有了很大發展，三資企業、鄉鎮（個體）模具企業的發展也相當迅速。 雖然中國模具工業發展迅速，但與需求相比，顯然供不應求，其主要缺口集中于精密、大型、復雜、長壽命模具領域。由于在模具精度、壽命、制造周期及生產能力

11、等方面，中國與國際平均水平和發達國家仍有較大差距，因此，每年需要大量進口模具。 中國模具產業除了要繼續提高生產能力，今后更要著重于行業內部結構的調整和技術發展水平的提高。結構調整方面，主要是企業結構向?qū)I(yè)化調整，產品結構向著中高檔模具發展，向進出口結構的改進，中高檔汽車覆蓋件模具成形分析及結構改進、多功能復合模具和復合加工及激光技術在模具設計制造上的應用、高速切削、超精加工及拋光技術、信息化方向發展。 近年，模具行業結構調整和體制改革步伐加大，主要表現在，大型、精密、復雜、長壽命、中高檔模具及模具標準件發展速度高于一般模具產品；塑料模和壓鑄模比例增大；專業模具廠數量及其生產能力增加；“三資”及

12、私營企業發展迅速；股份制改造步伐加快等。從地區分布來看，以珠江三角洲和長江三角洲為中心的東南沿海地區發展快于中西部地區，南方的發展快于北方。目前發展最快、模具生產最為集中的省份是廣東和浙江，江蘇、上海、安徽和山東等地近幾年也有較大發展。2. Mold Present Status of TechnologyTechnical level of Chinas mold industry currently uneven, with wide disparities generally speaking, with the developed industrial countries, Hong

13、Kong and Taiwan advanced level, there is a large gap. The use of CAD / CAM / CAE / CAPP and other technical design and manufacture molds, either wide application, or technical level, there is a big gap between both. In the application of CAD technology design molds, only about 10% of the mold used i

14、n the design of CAD, aside from drawing board still has a long way to go; in the application of CAE design and analysis of mold calculation, it was just started, most of the game is still in trial stages and animation; in the application of CAM technology manufacturing molds, first, the lack of adva

15、nced manufacturing equipment, and second, the existing process equipment (including the last 10 years the introduction of advanced equipment) or computer standard (IBM PC and compatibles, HP workstations, etc.) different, or because of differences in bytes, processing speed differences, differences

16、in resistance to electromagnetic interference, networking is low, only about 5% of the mold manufacturing equipment of recent work in this task; in the application process planning CAPP technology, basically a blank state, based on the need for a lot of standardization work; in the mold common techn

17、ology, such as mold rapid prototyping technology, polishing, electroforming technologies, surface treatment technology aspects of CAD / CAM technology in China has just started. Computer-aided technology, software development, is still at low level, the accumulation of knowledge and experience requi

18、red. Most of our mold factory, mold processing equipment shop old, long in the length of civilian service, accuracy, low efficiency, still use the ordinary forging, turning, milling, planning, drilling, grinding and processing equipment, mold, heat treatment is still in use salt bath, box-type furna

19、ce, operating with the experience of workers, poorly equipped, high energy consumption. Renewal of equipment is slow, technological innovation; technological progress is not much intensity. Although in recent years introduced many advanced mold processing equipment, but are too scattered, or not com

20、plete, only about 25% utilization, equipment, some of the advanced functions are not given full play.2.我國模具的結構現狀工業目前技術水平參差不齊，懸殊較大。從總體上來講，與發達工業國家及港臺地區先進水平相比，還有較大的差距。 在采用CAD/CAM/CAE/CAPP等技術設計與制造模具方面，無論是應用的廣泛性，還是技術水平上都存在很大的差距。在應用CAD技術設計模具方面，僅有約10%的模具在設計中采用了CAD，距拋開繪圖板還有漫長的一段路要走；在應用CAE進行模具方案設計和分析計算方面，也才剛

21、剛起步，大多還處于試用和動畫游戲階段；在應用CAM技術制造模具方面，一是缺乏先進適用的制造裝備，二是現有的工藝設備（包括近10多年來引進的先進設備）或因計算機制式（IBM微機及其兼容機、HP工作站等）不同，或因字節差異、運算速度差異、抗電磁干擾能力差異等，聯網率較低，只有5%左右的模具制造設備近年來才開展這項工作；在應用CAPP技術進行工藝規劃方面，基本上處于空白狀態，需要進行大量的標準化基礎工作；在模具共性工藝技術，如模具快速成型技術、拋光技術、電鑄成型技術、表面處理技術等方面的CAD/CAM技術應用在我國才剛起步。計算機輔助技術的軟件開發，尚處于較低水平，需要知識和經驗的積累。我國大部分模

22、具廠、車間的模具加工設備陳舊，在役期長、精度差、效率低，至今仍在使用普通的鍛、車、銑、刨、鉆、磨設備加工模具，熱處理加工仍在使用鹽浴、箱式爐，操作憑工人的經驗，設備簡陋，能耗高。設備更新速度緩慢，技術改造，技術進步力度不大。雖然近年來也引進了不少先進的模具加工設備，但過于分散，或不配套，利用率一般僅有25%左右，設備的一些先進功能也未能得到充分發揮。3. Die trend(1) Mold software features integrated Die software features of integrated software modules required relatively c

23、omplete, while the function module using the same data model, in order to achieve Syndicated news management and sharing of information to support the mold design, manufacture, assembly, inspection, testing and production management of the entire process to achieve optimal benefits. Series such as t

24、he UK Delcams software will include a surface / solid geometric modeling, engineering drawing complex geometry, advanced rendering industrial design, plastic mold design expert system, complex physical CAM, artistic design and sculpture automatic programming system, reverse engineering and complex s

25、ystems physical line measurement systems. A higher degree of integration of the software includes: Pro / ENGINEER, UG and CATIA, etc. Shanghai Jiao tong University, China with finite element analysis of metal plastic forming systems and Die CAD / CAM systems; Beijing Bei hang Haier Software Ltd. CAX

26、A Series software; Jilin Gold Grid Engineering Research Center of the stamping die mold CAD / CAE / CAM systems. (2) Mold design, analysis and manufacture of three-dimensionalTwo-dimensional mold of traditional structural design can no longer meet modern technical requirements of production and inte

27、gration. Mold design, analysis, manufacturing three-dimensional technology, paperless software required to mold a new generation of three-dimensional, intuitive sense to design the mold, using three-dimensional digital model can be easily used in the product structure of CAE analysis, tooling manufa

28、cturability evaluation and CNC machining, forming process simulation and information management and sharing. Such as Pro / E, UG and CATIA software such as with parametric, feature-based, all relevant characteristics, so that mold concurrent engineering possible. In addition, Cimarron company Mold e

29、xpert, Delcams Ps-mold and Hitachi Shipbuilding of Space-E/mold are professional injection mold 3D design software, interactive 3D cavity, core design, mold base design configuration and typical structure . Australian company Mold flow realistic three-dimensional flow simulation software MoldflowAdv

30、isers been widely praised by users and applications. China Huazhong University of Science has developed similar software HSC3D4.5F and Zhengzhou University, Z-mold software. For manufacturing, knowledge-based intelligent software function is a measure of die important sign of advanced and practical

31、one. Such as injection molding experts Cimarrons software can automatically generate parting direction based parting line and parting surface, generate products corresponding to the core and cavity, implementation of all relevant parts mold, and for automatically generated BOM Form NC drilling proce

32、ss, and can intelligently process parameter setting, calibration and other processing results. (3) Mold software applications, networking trend With the mold in the enterprise competition, cooperation, production and management, globalization, internationalization, and the rapid development of compu

33、ter hardware and software technology, the Internet has made in the mold industry, virtual design, and agile manufacturing technology both necessary and possible. 3.模具的發展趨勢 （1）模具軟件功能集成化 模具軟件功能的集成化要求軟件的功能模塊比較齊全，同時各功能模塊采用同一數據模型，以實現信息的綜合管理與共享，從而支持模具設計、制造、裝配、檢驗、測試及生產管理的全過程，達到實現最佳效益的目的。如英國Delcam公司的系列化軟件就包

34、括了曲面/實體幾何造型、復雜形體工程制圖、工業設計高級渲染、塑料模設計專家系統、復雜形體CAM、藝術造型及雕刻自動編程系統、逆向工程系統及復雜形體在線測量系統等。集成化程度較高的軟件還包括：Pro/ENGINEER、UG和CATIA等。國內有上海交通大學金屬塑性成型有限元分析系統和沖裁模CAD/CAM系統；北京北航海爾軟件有限公司的CAXA系列軟件；吉林金網格模具工程研究中心的沖壓模CAD/CAE/CAM系統等。 （2）模具設計、分析及制造的三維化 傳統的二維模具結構設計已越來越不適應現代化生產和集成化技術要求。模具設計、分析、制造的三維化、無紙化要求新一代模具軟件以立體的、直觀的感覺來設計模

35、具，所采用的三維數字化模型能方便地用于產品結構的CAE分析、模具可制造性評價和數控加工、成形過程模擬及信息的管理與共享。如Pro/ENGINEER、UG和CATIA等軟件具備參數化、基于特征、全相關等特點，從而使模具并行工程成為可能。另外，Cimatran公司的Moldexpert，Delcam公司的Ps-mold及日立造船的Space-E/mold均是3D專業注塑模設計軟件，可進行交互式3D型腔、型芯設計、模架配置及典型結構設計。澳大利亞Moldflow公司的三維真實感流動模擬軟件MoldflowAdvisers已經受到用戶廣泛的好評和應用。國內有華中理工大學研制的同類軟件HSC3D4.5F

36、及鄭州工業大學的Z-mold軟件。面向制造、基于知識的智能化功能是衡量模具軟件先進性和實用性的重要標志之一。如Cimatron公司的注塑模專家軟件能根據脫模方向自動產生分型線和分型面，生成與制品相對應的型芯和型腔，實現模架零件的全相關，自動產生材料明細表和供NC加工的鉆孔表格，并能進行智能化加工參數設定、加工結果校驗等。 （3）模具軟件應用的網絡化趨勢 隨著模具在企業競爭、合作、生產和管理等方面的全球化、國際化，以及計算機軟硬件技術的迅速發展，網絡使得在模具行業應用虛擬設計、敏捷制造技術既有必要，也有可能。4. Heat Treatment of DieTraditional die and

37、mould design, mainly by experience or semiexperience，is isolated from manufacturing process. Before the design is finalized，the scheme of die and mould is usually modified time and again，thus some disadvantages come into being, such as long development period, high cost and uncertain practical effec

38、t. Due to strong desires for precision, service life, development period and cost, modern die and mould should be designed and manufactured perfectly. Therefore more and more advanced technologies and innovations have been applied, for example, concurrent engineering, agile manufacturing virtual man

39、ufacturing, collaborative design, etc.Heat treatment of die and mould is as important as design, manufacture and assembly because it has a vital effect on manufacture，assembly and service lifeDesign and manufacture of die and mould have progressed rapidly，but heat treatment lagged seriously behind t

40、hemAs die and mould industry develops，heat treatment must ensure die and mould there are good state of manufacture，assembly and wearresistant properties by request. Impertinent heat treatment can influence die and mould manufacturing such as overhard andsoft and assemblyTraditionally the heat treatm

41、ent process was made out according to the methods and properties brought forward by designerThis could make the designers of die and mould and heat treatment diverge from each other，for the designers of die and mould could not fully realize heat treatment process and materials properties，and contrar

42、ily the designers rarely understood the service environment and designing thought. These divergences will impact the progress of die and mould to a great extent. Accordingly，if the process design of heat treatment is considered in the early designing stage，the aims of shortening development period，r

43、educing cost and stabilizing quality will be achieved and the sublimation of development pattern from serial to concurrent will be realizedConcurrent engineering takes computer integration system as a carrier, at the very start subsequent each stage and factors have been considered such as manufactu

44、ring，heat treating，properties and so forth in order to avoid the errorThe concurrent pattern has dismissed the defect of serial pattern, which bring about a revolution against serial patternIn the present workthe heat treatment was integrated into the concurrent circumstance of the die and mould dev

45、elopment，and the systemic and profound research was performed4.模具的熱處理模具設計主要是依照自身實踐經驗或依照部分實踐經驗，而不是制造工藝。在設計完成之前，模具方案通常要被一次又一次的改進，于是有些缺點便出現，例如開發時期長，成本高和實際效果不明顯。由于對精確性、使用壽命、開發期和費用的嚴格要求，先進的模具要求設計和制造得十分完善。因此越來越先進的技術和創新方法被應用其中，例如并行工程、敏捷制造業、虛擬制造業、協同合作設計等。模具的熱處理與模具設計，制造和裝配同樣重要。因?yàn)樗鼘?duì)模具的制造裝配和使用壽命又及其重要的影響。模具設計與制

46、造發展十分迅速，但是熱處理發展卻嚴重滯后它們。隨著模具工業的發展，熱處理必須保證模具有良好的制造裝配和磨損耐熱性能。不切實際的熱處理將導致模具材料過硬或過軟，同時影響模具裝配性能。傳統的熱處理工藝是按照設計師提出的方法和特性制作出來的。這樣會使模具設計師和熱處理工藝師意見產生分歧，而模具設計師卻不能充分地了解熱處理工藝和材料的性能，相反熱處理工藝師卻很少了解模具的使用環境和設計思路。這些分歧將在很大程度上影響模具的發展。因此，如果把熱處理工藝設計放在設計階段之前，則縮短開發周期，減少花費和保證質量等目標將會被考慮，而且從串行到并行的發展模式也將會實現。并行工程是以計算機集成系統作為載體，在開始

47、以后，每個階段和因素都被看作如制造、熱處理、性能等等，以避免出現錯誤。并行模式已經摒除了串行模式的缺陷，由此帶來了一場對串行模式的革命。在當前的工作中，熱處理被集成到了模具開發的并行環境中，同時也正在進行這種系統性和深入性的研究。總結5. Summary進入21世紀，在經濟全球化的新形勢下，隨著資本、技術和勞動力市場的重新整合，我國裝備制造業在加入WTO以后，將成為世界裝The 21st century, in the new situation of economic globalization, with capital, technology and labor market re-in

48、tegration of equipment manufacturing in China after joining the WTO will become the worlds equipment manufacturing base. 而在現代制造業中，無論哪一行業的工程裝備，都越來越多地采用由模具工業提供的產品。 In the modern manufacturing industry, no matter which industry, engineering equipment, are increasingly used to provide the products from

49、the mold industry. 為了適應用戶對模具制造的高精度、短交貨期、低成本的迫切要求，模具工業正廣泛應用現代先進制造技術來加速模具工業的技術進步，滿足各行各業對模具這一基礎工藝裝備的迫切需求。 In order to meet the users high-precision mold manufacturing, short delivery time, the urgent demand low-cost, mold industry is extensive application of modern advanced manufacturing technology to

50、speed up the mold industry, technological progress, to meet the basic sectors of the mold process equipment urgent needs.5.總結總結進入21世紀，在經濟全球化的新形勢下，隨著資本、技術和勞動力市場的重新整合，我國裝備制造業在加入WTO以后，將成為世界裝備制造業的基地。而在現代制造業中，無論哪一行業的工程裝備，都越來越多地采用由模具工業提供的產品。為了適應用戶對模具制造的高精度、短交貨期、低成本的迫切要求，模具工業正廣泛應用現代先進制造技術來加速模具工業的技術進步，滿足各行各

51、業對模具這一基礎工藝裝備的迫切需求。X13.參考書目參考文獻1模具設計與制造黨根茂 駱志斌 李集仁編，西安電子科技大學出版社2沖壓工藝與模具設計張如華主編，清華大學出版3沖壓工藝與模具設計王信友主編，清華大學出版4模具設計與制造簡明手冊馮炳堯等編，上?？茖W(xué)技術出版社5實用模具技術手冊鄧石城 王旭編，上?？茖W(xué)技術出版社6沖模設計手冊張鼎承主編，機械工業出版社7互換性與技術測量廖念釗主編，機械工業出版社8冷沖模設計手冊編寫組，機械工業出版社9沖壓加工設備與自動化王平主編，華中科技大學出版社10冷沖模具設計精要周本凱編寫11模具專業英語機械工業出版社14.謝辭致謝詞本文主要闡述了沖壓工藝及模具，讓我

52、對沖壓模具產生了濃厚的興趣，同時，受我專業的影響，我已經習慣于關注帶來的一系列機遇與挑戰。 本篇設計雖然凝聚著自己的汗水，但卻不是個人智慧的產品，沒有老師的指引和贈予，沒有父母和朋友的幫助和支持，我在大學的學術成長肯定會大打折扣。當我打完畢業論文的最后一個字符，涌上心頭的不是長途跋涉后抵達終點的欣喜，而是源自心底的誠摯謝意。我首先要感謝我的老師盧振華，對我的構思以及設計的內容不厭其煩的進行多次指導和悉心指點，使我在完成論文的同時也深受啟發和教育。 再次由衷感謝答辯組的各位老師對學生的指導和教誨，我也在努力的積蓄著力量，盡自己的微薄之力回報母校的培育之情，爭取使自己的人生對社會產生些許積極的價值

53、！15.附頁凹模加工工藝過程 材料：Gr12硬度：5862HRC零件工藝過程卡模具名稱止動片級進模零件編號1零件名稱凹模零件件數1工序號工序名稱工序內容設備1備料鍛件（退火狀態）175145352粗銑銑六面到尺寸17214232，注意兩大平面與相鄰鄰側面用標準角尺測量達基本垂直線割機3平面磨磨光兩大平面厚度達31，并磨兩相鄰側面達四面垂直。垂直度0.02/1004鉗劃線 劃出各孔徑中心線并劃出凹模洞口輪廓尺寸鉆孔 鉆螺紋底孔，銷釘?shù)卓?，凹模洞口穿線孔鉸孔 鉸銷釘孔到要求攻絲 攻螺紋絲到要求5熱處理淬火 使硬度達58-62HRC6平面磨磨光兩大平面，使厚度達30.5鏜床7線切割割凹模洞口，并留0

54、.010.02研余量8鉗研磨洞口內壁側面達0.8um配推件塊到要求9平磨磨凹模板上平面厚度達要求10鉗總裝配沖孔凸模加工工藝過程 材料：Cr12硬度：5260HRC零件工藝過程卡模具名稱止動片級進模零件編號2零件名稱沖孔凸模零件件數2序號工序名稱工序內容1備料鍛件（退火狀態）：1570線割機2熱處理退火，硬度達到5260HRC3車 一端面，打頂尖孔。車外圓至12；掉頭車另一端面，長度至尺寸66；打孔尖孔。雙頂尖頂，車外圓尺寸12圓，達到11至要求，4熱處理淬火，硬度至5260H RC。鏜床5磨削磨削外圓尺寸11，10至要求6線切削切除工作端面頂尖孔，長度尺寸至65要求7磨削磨削端面至Ra0.8

55、um8鉗總裝配落料凸模加工工藝過程 材料：Gr12硬度：5260HRC零件工藝過程卡模具名稱止動片級進模零件編號2零件名稱落料凸模零件件數1工序號工序名稱工序內容設備1備料鍛件（退火狀態）：7535702粗銑銑六面見光線割機3平磨磨高度兩平面到尺寸684鉗劃線 在長度方一側線切割?yuàn)A位6后，劃凸模輪廓線并劃凸模中線。按凸模洞口中心鉆線切割穿絲孔、正方形。5熱處理淬火 硬度達5260HRC6平磨磨高度到65.5鏜床7線切割割凸模及兩凹模，并單邊留0.010.02研磨余量8鉗研配 研凸模并配入凸模固定板研 各側壁到0.8um9平磨磨高度到要求10鉗總裝配凸模固定板加工工藝過程 材料：Q275硬度：4

56、348HRC零件工藝過程卡模具名稱止動片級進模零件編號3零件名稱凸模固定板零件件數1工序號工序名稱工序內容設備1備料下料175145252熱處理調質 硬度4348HRC線割機3粗銑銑六面達17214222mm，并使兩大平面和相鄰兩側面相互基本垂直4平磨磨光兩大平面厚度達20.5，并磨兩相鄰側面使四面垂直，垂直度0.02/1005鉗劃線 凸模固定孔中心線，銷釘孔中心線，螺紋過中心線，銷釘過孔中心線鉆孔 凸模固定孔穿絲線，螺紋過孔和銷釘過孔到要求6線切割割凸模安裝固定孔單邊留0.010.02研余量鏜床7銑銑凸模固定孔背面沉孔到要求8鉗研配凸模板9平磨磨模厚度到要求10鉗總裝配 卸料板加工工藝過程

57、材料：Q275硬度：4348HRC零件工藝過程卡模具名稱止動片級進模零件編號4零件名稱卸料板零件件數1工序號工序名稱工序內容設備1備料下料175145252熱處理調質 硬度4348HRC線割機3粗銑銑六面17214222，并使兩大平面和相鄰兩側面基本垂直4平磨磨光兩大平面，厚度達20，并磨兩相鄰側面使四面垂直，垂直度0.02/1005鉗劃線 螺紋孔中心線，守位孔中心線及中間型孔輪廓線鉆孔 螺紋底孔，定位釘?shù)卓仔涂状┚€(xiàn)孔鉸絲，攻絲 鉸定位釘孔到要求，螺紋孔攻絲到要求6線切割割型孔到要求鏜床7鉗型孔與凸模裝配定位釘與定位釘裝配螺紋孔與螺釘裝配8平磨磨厚度到要求9鉗總裝配凸模墊板加工工藝過程 材料：

58、45鋼硬度：4348HRC零件工藝過程卡模具名稱墊片級進模零件編號5零件名稱上墊板零件件數1工序號工序名稱工序內容設備1備料鍛件：175145102粗銑銑六面達1721427，并使兩大平面和相鄰兩側基本垂直線割機3平磨磨光兩大平面，厚度達6.5，并磨兩相鄰側面使四面垂直，垂直度0.02/1004鉗劃線 螺紋過孔中心線，銷釘過孔中心線鉆孔 鉆螺紋過孔，銷釘過孔到要求5熱處理淬火 硬度：4348HRC6平磨磨兩大平面厚度達要求鏜床7鉗總裝配凹模墊板加工工藝過程 材料：45鋼硬度：5458HRC零件工藝過程卡模具名稱墊片級進模零件編號6零件名稱下墊板零件件數1工序號工序名稱工序內容設備1備料鍛件：1

59、75145102粗銑銑六面達1721427，并使兩大平面和相鄰兩側基本垂直線割機3平磨磨光兩大平面，厚度達6.5，并磨兩相鄰側面使四面垂直，垂直度0.02/1004鉗劃線 緊固螺釘過孔中心線，卸料螺釘過孔空中心線，銷釘孔中心線，落廢料孔中心線，凸凹模緊固螺釘過孔中心線鉆孔 鉆上述各孔到要求5熱處理淬火 硬度：4348HRC6平磨磨兩大平面厚度達要求鏜床7鉗總裝配導料板加工工藝過程 材料：Q275硬度：5458HRC零件工藝過程卡模具名稱墊片級進模零件編號7零件名稱導料板零件件數2工序號工序名稱工序內容設備1備料鍛件（退火狀態）14555102粗銑銑六面達142527，并使兩大平面和相鄰兩側基本垂直線割機3平磨磨光兩大平面，厚度達6.5，并磨兩相鄰側面使四面垂直，垂直度0.02/1004鉗劃線 緊固螺釘過孔中心線，卸料螺釘過孔空中心線，銷釘孔中心線，落廢料孔中心線，凸凹模緊固螺釘過孔中心線鉆孔 鉆上述各孔到要求5熱處理淬火 硬度：4348HRC6平磨磨兩大平面厚度達要求鏜床7鉗總裝配46