大數據結構線性表格地指導應用實驗資料報告材料

word實 驗 報 告課程名稱 _數據結構上機實驗_實驗項目 _線性表的應用 _實驗儀器 _PC機_系 別_電子信息與通信學院_專 業_ _ 班級/學號_ _學生 _ _實驗日期 _成 績 _指導教師 _實驗一. 線性表的應用1. 實驗?zāi)康模赫莆站€(xiàn)性鏈表的存儲、運算與應用。利用鏈表實現一元多項式計算。2. 實驗容：1) 編寫函數，實現用鏈表結構建立多項式；2) 編寫函數，實現多項式的加法運算；3) 編寫函數，實現多項式的顯示；4) 測試：編寫主函數，它定義并建立兩個多項式，顯示兩個多項式，然后將它們相加并顯示結果。變換測試用的多項式，檢查程序的執行結果。選做容：修改程序，選擇實現以下功能：5) 多項式求值：編寫一個函數，根據給定的x值計算并返回多項式f(x)的值。測試該函數從終端輸入一個x的值，調用該函數并顯示返回結果。6) 多項式相減：編寫一個函數，求兩個多項式相減的多項式。7) 多項式相乘：編寫一個函數，求兩個多項式的乘積多項式。3. 算法說明：1) 多項式的建立、顯示和相加算法見講義?？尚薷娘@示函數，使輸出的多項式更符合表達規。2) 多項式減法：同次項的系數相減缺項的系數是0。例如a(x)=-5x2+2x+3，b(x)= -4x3+3x，如此a(x)-b(x)=4x3-5x2-x+3。提示：a(x)-b(x)= a(x)+(-b(x)。3) 多項式乘法：兩個多項式的相乘是“系數相乘，指數相加。算法思想是用一個多項式中的各項分別與另一個多項式相乘，形成多個多項式，再將它們累加在一起。例如，a(x)=-5x2+2x+3，b(x)=-4x3+3x，如此a(x)*b(x)=(-4x3)*(-5x2+2x+3)+(3x)*(-5x2+2x+3) =(20x5-8x4-12x3) +(-15x3+6x2+9x) = 20x5-8x4-27x3+6x2+9x。4. 實驗步驟：根據實驗報告的要求，我對文件夾里的C文件進展了豐富和修改，步驟如下：鏈表結構建立多項式：typedef struct polynode float coef; /系數 int exp; /指數 struct polynode *next; /下一結點指針 PNode; 編寫函數，實現多項式的加法運算；PNode * PolyAdd (PNode *f1, PNode *f2) /實現加法功能。 /實現兩多項式頭指針?lè)謩e為f1和f2相加，返回和多項式f3=f1+f2。PNode *pa=f1->next,*pb=f2->next,*pc,*f3,*q;int exp;float coef;f3=(PNode *)malloc(sizeof(PNode); /建立頭指針f3->exp=-1; /對頭指針初始化f3->next=f3;pc=f3; /將pc指向頭指針while (pa->exp!=-1 | pb->exp!=-1) / 返回頭指針時，跳出循環if (pa->exp>pb->exp) exp=pa->exp; coef=pa->coef; pa=pa->next;else if (pa->exp<pb->exp) exp=pb->exp; coef=pb->coef; pb=pb->next;else exp=pa->exp;coef=pa->coef+pb->coef;pa=pa->next;pb=pb->next;if (coef!=0) q=(PNode *)malloc(sizeof(PNode); /建立新的q指針存放負指數的指針q->exp=exp;q->coef=coef; /將q插入鏈表中q->next=pc->next;pc->next=q;pc=q; return f3; /返回實現多項式的顯示；void ShowPloy(PNode *h) /用if語句判斷，當指數為0是，只輸出系數；當指數為1時，輸出系數和X；當系數為1時，輸出X和指數。h=paixu(h); /整理函數，使之降冪排列PNode *p=h->next;if(p=h) printf("表達式為空n"); return; if(p->coef=1) printf("x%d",p->exp); /用if語句判斷，假設輸出xo和x1值為0和1 直接輸出數據。 else if(p->exp=1) printf("%gx", p->coef);else if(p->exp=0) printf("%g", p->coef);else printf("%gx%d", p->coef, p->exp);p=p->next;while (p!=h) if(p->coef>0) printf("+"); /系數為負，不用輸出加號if(p->coef=1) printf("x%d",p->exp);else if(p->exp=1) printf("%gx", p->coef);else if(p->exp=0) printf("%g", p->coef);else printf("%gx%d", p->coef, p->exp); p=p->next; printf("n");主函數void main()PNode *F1,*F2,*F3;float x;F1=CreatPoly();F2=CreatPoly();printf("nf1(x)=");ShowPloy(F1);printf("nf2(x)=");ShowPloy(F2);F3=PolyAdd(F1,F2);F3=paixu(F3);printf("nf1+f2=:");ShowPloy(F3);F3=PolySub(F1,F2);printf("nf1-f2=:");ShowPloy(F3);F3=PolyMult(F1,F2);printf("nf1*f2=:");ShowPloy(F3);printf("nx的值為: ");scanf("%f", &x);printf("nf1(x=%.3f)=%.3fn",x,PolyValue(F1,x);多項式求值double PolyValue(PNode *h, float x) /編寫算法，求以h為頭指針的多項式在x點的值并返回該值。double f=0.0;/求出f=f(x);PNode *pa;h=paixu(h);pa=h->next;while(pa->exp!=-1) /使用f+=coef*pow，返回ff+=(pa->coef)*pow(x,pa->exp);pa=pa->next;return f;多項式相減PNode * PolySub(PNode *f1,PNode *f2)/編寫此算法，實現兩多項式頭指針?lè)謩e為f1和f2相減，返回差多項式f3=f1-f2。PNode *pa=f1->next,*pb=f2->next,*pc,*f3,*q,*head;f3=(PNode *)malloc(sizeof(PNode); /建立頭指針f3->exp=-1; /頭指針的初始化f3->next=f3;pc=f3; /pc指向頭指針,便于操作。while(pb->exp!=-1) /返回頭指針時，跳出循環。q=(PNode *)malloc(sizeof(PNode); /建立新的q指針存放負指數的指針q->coef=pb->coef*(-1);q->exp=pb->exp; /將q插入鏈表中q->next=pc->next; pc->next=q;pc=q;pb=pb->next;head=PolyAdd(f1,f3); /調用加法函數做減法return head; /返回頭指針多項式相乘PNode * PolyMult(PNode *f1,PNode *f2)/實現兩多項式頭指針?lè)謩e為f1和f2相乘，返回乘積多項式f3=f1*f2。PNode *pa=f1->next,*pb=f2->next,*pc,*u,*head;int exp;float coef;head=(PNode *)malloc(sizeof(PNode);head->exp=-1;head->next=head;pc=head;while(pa->exp!=-1) /多項式相乘，錄入u指針，查到頭指針。while(pb->exp!=-1)coef=pa->coef*pb->coef;exp=pa->exp+pb->exp;u=(PNode *)malloc(sizeof(PNode);u->coef=coef;u->exp=exp;u->next=pc->next;pc->next=u;pc=u;pb=pb->next;pb=pb->next;pa=pa->next;return head; /返回頭指針程序運行截圖測試成功！程序完整源代碼如下：#include <stdio.h>#include <stdlib.h>#include <math.h>typedef struct polynode float coef; /系數 int exp; /指數 struct polynode *next; /下一結點指針 PNode; PNode * paixu(PNode *f) /將多項式降冪排列PNode *p,*q,*r,*p0,*q0;p=f->next;q=p->next;p0=f;q0=p; while(p->exp!=-1) /p為q的前驅，q與p指數指數值進展比擬，while(q->exp!=-1) /q為頭指針推出循環，q移動一圈if(p->exp>q->exp) /比擬，假設p大于q如此q后移 q0=q;q=q->next;else if(p->exp<q->exp) /假設p小于q如此q插入p之前r=q->next;q->next=p0->next;q0->next=r;p0->next=q;p=q;q=r;else if(p->exp=q->exp) /假設相等，p的coef 與q的相加，然后刪除q節點，釋放q的空間p->coef+=q->coef;q0->next=q->next;q=q->next;p0=p;p=p->next;q=p->next;q0=p;return f;void ShowPloy(PNode *h) /用if語句判斷，當指數為0是，只輸出系數；當指數為1時，輸出系數和X；當系數為1時，輸出X和指數。h=paixu(h); /整理函數，使之降冪排列PNode *p=h->next;if(p=h) printf("表達式為空n"); return; if(p->coef=1) printf("x%d",p->exp); /用if語句判斷，假設輸出xo和x1值為0和1 直接輸出數據。 else if(p->exp=1) printf("%gx", p->coef);else if(p->exp=0) printf("%g", p->coef);else printf("%gx%d", p->coef, p->exp);p=p->next;while (p!=h) if(p->coef>0) printf("+"); /系數為負，不用輸出加號if(p->coef=1) printf("x%d",p->exp);else if(p->exp=1) printf("%gx", p->coef);else if(p->exp=0) printf("%g", p->coef);else printf("%gx%d", p->coef, p->exp); p=p->next; printf("n");PNode * CreatPoly() /建立多項式鏈表，返回頭指針 PNode * head, *p, *s; int i,n;head=(PNode *)malloc(sizeof(PNode);head->exp=-1;p=head;printf("多項式的項數為: ");scanf("%d",&n);for(i=1;i<=n; i+) s=(PNode *)malloc(sizeof(PNode);printf("請輸入多項式第%d項的系數和指數用逗號隔開: ",i);scanf("%g,%d",&s->coef,&s->exp);p->next=s;p=s; p->next=head;return head;void FreePoly(PNode *h) /編寫此算法，將以h為頭指針的多項式的鏈表結點逐個釋放。PNode *p,*q;p=h->next;while(p->exp)!+-1;q=p->next;free(p);p=q;free(h);return; /Free函數用于銷毀鏈表，最后指向頭指針，跳出循環并釋放頭指針。PNode * PolyAdd (PNode *f1, PNode *f2) /實現加法功能。 /實現兩多項式頭指針?lè)謩e為f1和f2相加，返回和多項式f3=f1+f2。PNode *pa=f1->next,*pb=f2->next,*pc,*f3,*q;int exp;float coef;f3=(PNode *)malloc(sizeof(PNode); /建立頭指針f3->exp=-1; /對頭指針初始化f3->next=f3;pc=f3; /將pc指向頭指針while (pa->exp!=-1 | pb->exp!=-1) / 返回頭指針時，跳出循環if (pa->exp>pb->exp) exp=pa->exp; coef=pa->coef; pa=pa->next;else if (pa->exp<pb->exp) exp=pb->exp; coef=pb->coef; pb=pb->next;else exp=pa->exp;coef=pa->coef+pb->coef;pa=pa->next;pb=pb->next;if (coef!=0) q=(PNode *)malloc(sizeof(PNode); /建立新的q指針存放負指數的指針q->exp=exp;q->coef=coef; /將q插入鏈表中q->next=pc->next;pc->next=q;pc=q; return f3; /返回PNode * PolySub(PNode *f1,PNode *f2)/編寫此算法，實現兩多項式頭指針?lè)謩e為f1和f2相減，返回差多項式f3=f1-f2。PNode *pa=f1->next,*pb=f2->next,*pc,*f3,*q,*head;f3=(PNode *)malloc(sizeof(PNode); /建立頭指針f3->exp=-1; /頭指針的初始化f3->next=f3;pc=f3; /pc指向頭指針,便于操作。while(pb->exp!=-1) /返回頭指針時，跳出循環。q=(PNode *)malloc(sizeof(PNode); /建立新的q指針存放負指數的指針q->coef=pb->coef*(-1);q->exp=pb->exp; /將q插入鏈表中q->next=pc->next; pc->next=q;pc=q;pb=pb->next;head=PolyAdd(f1,f3); /調用加法函數做減法return head; /返回頭指針PNode * PolyMult(PNode *f1,PNode *f2)/實現兩多項式頭指針?lè)謩e為f1和f2相乘，返回乘積多項式f3=f1*f2。PNode *pa=f1->next,*pb=f2->next,*pc,*u,*head;int exp;float coef;head=(PNode *)malloc(sizeof(PNode);head->exp=-1;head->next=head;pc=head;while(pa->exp!=-1) /多項式相乘，錄入u指針，查到頭指針。while(pb->exp!=-1)coef=pa->coef*pb->coef;exp=pa->exp+pb->exp;u=(PNode *)malloc(sizeof(PNode);u->coef=coef;u->exp=exp;u->next=pc->next;pc->next=u;pc=u;pb=pb->next;pb=pb->next;pa=pa->next;return head; /返回頭指針double PolyValue(PNode *h, float x) /實現多項式求值功能。利用指針求出每一項的值，再用加法加起來。/編寫算法，求以h為頭指針的多項式在x點的值并返回該值。double f=0.0;/求出f=f(x);PNode *pa;h=paixu(h);pa=h->next;while(pa->exp!=-1) /使用f+=coef*pow，返回ff+=(pa->coef)*pow(x,pa->exp);pa=pa->next;return f;void main()PNode *F1,*F2,*F3;float x;F1=CreatPoly();F2=CreatPoly();printf("nf1(x)=");ShowPloy(F1);printf("nf2(x)=");ShowPloy(F2);F3=PolyAdd(F1,F2);F3=paixu(F3);printf("nf1+f2=:");ShowPloy(F3);F3=PolySub(F1,F2);printf("nf1-f2=:");ShowPloy(F3);F3=PolyMult(F1,F2);printf("nf1*f2=:");ShowPloy(F3);printf("nx的值為: ");scanf("%f", &x);printf("nf1(x=%.3f)=%.3fn",x,PolyValue(F1,x);實驗總結：這次試驗提高了我的編程能力，讓我認識到了我C語言的不足之處。也使我了解了線性鏈表是具有存儲結構的線性表，它用節點存放線性表中的數據元素，邏輯上相鄰的節點不能隨機存取，因?yàn)檫@個原因我前期的程序一直出錯，以后編程序的時候要牢記。25 / 25